How to Install Picture Frame Wire
The video you are watching is for purposes of informational and educational reference only.
The DEFINITIVE Case Of Install Picture Frame Wire,
When you want to hang a framed picture or work of art one of the most common ways to do so is by installing picture frame wire so you can hang the frame on hooks in the wall. First screw D rings into each side of the back of the frame. Then secure picture frame wire around the D rings by using slipknots and wrapping it around itself. In no time at all your frame will be ready to hang Put the frame face down on a flat work surface with the bottom nearest to you. Lay the frame face up in front of you first so you are sure the bottom of the frame is closest to you. Carefully flip it over so you are looking at the back side.
Put a sticky felt bump in each of the bottom corners of the picture frame. Put 1 small sticky felt bump in each corner. This will steady it on the wall once it is hung and allow air to circulate behind it.
Measure and mark 1/3 of the way down from the top of the frame. Use a ruler or measuring tape to measure 1/3 of the way down from the top on 1 side and make a mark with a pencil. Repeat this on the other side.
Screw a D ring into each side where you made the marks. Lay the D rings so the screw holes line up with your marks and the D shapes face inwards towards the center of the frame. Attach the D rings using the provided screws.
This video contains a digital rendering of a celebrity personalities likeness and voice for comedic and satirical value. The opinions and information expressed in this video are not representative of those of the actual celebrity personality. No affiliation exists between the celebrity personality and the producer of this video.
The video you are watching is for purposes of informational and educational reference only.
The DEFINITIVE Case Of Install Picture Frame Wire,
When you want to hang a framed picture or work of art one of the most common ways to do so is by installing picture frame wire so you can hang the frame on hooks in the wall. First screw D rings into each side of the back of the frame. Then secure picture frame wire around the D rings by using slipknots and wrapping it around itself. In no time at all your frame will be ready to hang Put the frame face down on a flat work surface with the bottom nearest to you. Lay the frame face up in front of you first so you are sure the bottom of the frame is closest to you. Carefully flip it over so you are looking at the back side.
Put a sticky felt bump in each of the bottom corners of the picture frame. Put 1 small sticky felt bump in each corner. This will steady it on the wall once it is hung and allow air to circulate behind it.
Measure and mark 1/3 of the way down from the top of the frame. Use a ruler or measuring tape to measure 1/3 of the way down from the top on 1 side and make a mark with a pencil. Repeat this on the other side.
Screw a D ring into each side where you made the marks. Lay the D rings so the screw holes line up with your marks and the D shapes face inwards towards the center of the frame. Attach the D rings using the provided screws.
This video contains a digital rendering of a celebrity personalities likeness and voice for comedic and satirical value. The opinions and information expressed in this video are not representative of those of the actual celebrity personality. No affiliation exists between the celebrity personality and the producer of this video.
Category
🛠️
Lifestyle