Visit my website: https://www.ariswoodshop.com
The station requires 6 pieces of 40x40cm plywood, four for the shelves and two for the sides. for the back you need a piece 42.4x40cm. The plywood is 12mm or ½ inch. To support the bottom shelf you'll need 3 pieces 10x10cm. I used 4x40mm screws to assemble the station. I now have a place to store my drills and screws conviniently. Overall build time was about 3 hrs.
The Link to the Sketch Up file: http://ariswoodshop.com/data/documents/Drill_station.skp
The station requires 6 pieces of 40x40cm plywood, four for the shelves and two for the sides. for the back you need a piece 42.4x40cm. The plywood is 12mm or ½ inch. To support the bottom shelf you'll need 3 pieces 10x10cm. I used 4x40mm screws to assemble the station. I now have a place to store my drills and screws conviniently. Overall build time was about 3 hrs.
The Link to the Sketch Up file: http://ariswoodshop.com/data/documents/Drill_station.skp
Category
🛠️
Lifestyle