How to create 3D models How to edit 3D models and more
red band alley building plot
Drag and drop Blender plane 4x4 2m RGB
all you need to do is add road markings
all other assets will be uploaded soon
download free thanks
https://skfb.ly/prvEU
red band alley building plot
Drag and drop Blender plane 4x4 2m RGB
all you need to do is add road markings
all other assets will be uploaded soon
download free thanks
https://skfb.ly/prvEU
Category
🛠️
LifestyleTranscript
00:00Hello everyone and welcome back. In this video we'll be creating the... Now I've filled that
00:07little gap that was just there. I've filled it in so I'll show you afterwards. I don't
00:12really need to show you because there's nothing really there. I'll just kind of fill the gap
00:18in and go into this mode for you. Go into standard. I'm going to tilt the camera around
00:25so you can go back and have a look. I'm not going to show you the actual geometry so you
00:31can actually see that I actually did fill it in. As you can see all I've done was I
00:40joined the bottom corner from here to here. I joined it to here and then basically I'd
00:47have joined all of this corner. I joined most of this corner to here and I joined most of
00:53this corner to here. I've done that because I need to draw a line from here over here.
00:57Look, this is the end of the road of course and this is not the end of this road. It's
01:04going to be the end of the junction. It's going to be down here somewhere. I need to
01:09put the white lines at the end of the road just so they're actually there. Anyway, that's
01:15what I'm going to do. I'm not doing that now. I'm not doing that at the moment so I'm going
01:19to leave the road like that. Now what I need to do is this is a blender square so all you
01:25have to do basically is go back in object mode, click off everything, go here, go add
01:31a plane, add to plane, like that. No difference. Move it up to these squares. Now we've got
01:41the blender square right there. What I need to do is move this to here so it's basically
01:47almost perfectly in that square because that's the end of Red Bend Alley. You need to go
01:53from here to here to here because we need to add the slabs that are around the building
02:00so otherwise it's not going to look right. Well, that's what I'm going to tell you. So
02:07what I want to do is I want to go to snapping tool and then I want to go to edit. Now that's
02:15all you want to do. I'm trying to keep it as easy and simple as I really can. So I said
02:21go to edges, click on the edge. Now if you've got snapping turned on you should snap from
02:26square to square like that. Which is great. Go here, extrude, go one, two, leave it, go
02:37one, two and then leave it. You've got to do that basically all the way around to be able to make
02:46sure you stop at every two. Put a line in there for you. One, two. Now you see how I've got one
02:55slab short here. One, two. I've actually gone past in the building. If you look here, I'm exactly
03:03two. So even though it's a bit short here I'm going to put a half a slab in there. I don't
03:14have to put a half slab in there because I can put a full slab in. I've just got to cut out this one
03:19corner. That actually might work. Now of course I've got to go along the back of the building.
03:26One, two. Now you see I didn't put a line in. You don't have to go back but I'm going to go back
03:35because I want to go two. I want to go one, two. I can put the line in myself but I don't want to.
03:44I want the software to put it in because exactly where the line is is exactly where it's going to
03:48snap together. As I said the building and the roadway they don't have to really kind of snap
03:55together but all of the platforms they have to snap together because the buildings are not going
04:02to match and the buildings have to match basically almost 100% there about. As I said I've got exactly there look.
04:13So there's my ruler around the building so I'll go over here. Now that wasn't really too hard really but of course now we have to attach it to the building.
04:27I'm thinking yeah it's not actually part of the building at the moment but I'm thinking not only that I've got to make sure that I do this one the same as this one
04:41because otherwise it's definitely not going to match. Now of course at the end of the road here we would have like
04:47oh now normally when the tarmac finishes we've got a pavement we've got a bit of curb down here
04:54so I'm going to add the curb onto here because I don't want it to be on the slabs
05:00so I'm going to cut the road from here to here and I'm going to exclude it and I'm going to attach
05:04it to that that's what I'm going to do because there's no other way around it. I was actually
05:11going to just put the slabs here that's what I was going to do and then put some like concrete
05:15ballards there so the cars can't get past it but I'm thinking you know because sometimes the road is like that
05:21but um you know I don't really want concrete ballards in the road not really.
05:29Maybe I could put it there I don't really know but just to say look it's the end of the road
05:33but you can tell it's the end of the road because there's a building there so I'm thinking yeah because
05:39we don't want a car smashing into the building we just don't want that. As I said now I can either
05:45exclude these out or I can just basically attach them myself to the actual brickwork so I'm thinking
05:55what's going to be the easier option so obviously I need to look at the building itself
06:01because there should be a point right there on a building there shouldn't be any point anywhere else
06:08I'm thinking is the building is this actually part of the building and probably not because I'm going
06:15to have it separate so I'm thinking if I'm going to have it separate then obviously I need to kind of
06:19click on the edges go back here so what we're going to do we're going to exclude it out temporarily
06:25temporarily
06:28and we'll see kind of how it looks so if you pull it out
06:33one square
06:35here one square
06:43that's where I don't forget it's a full square so obviously I can't do the same with this one
06:49because obviously it's not going to be the same so I need to do that one in a moment
06:53so I need to kind of work on what I'm actually doing with it
06:57so just pull it up just pull this square out and then don't worry about the actual
07:02red band on it you'll hate that
07:07if you pull this one out it's going to be kind of
07:12you see how it touches the edge of it it's kind of great for
07:17that's because everything is is more or less a square four squares not one square basically
07:23that's what they are so I'm thinking see I'm red band and it fits right inside that little square
07:32well it will fit inside the square once I do the square but I'm just looking at the squares
07:37I'm thinking here you know what's wrong with the squares
07:41I'll show you the squares are incorrect I'll go here for a moment then you'll see the squares
07:47the squares have to be like this
08:01this
08:14otherwise the slabs themselves they're not going to fit
08:21now I need to look at the slab when you don't see the slabs here I need to look at these slabs
08:32because I can't remember if it's one square or four squares you see the squares here
08:36you see it should be like three squared and one I think so if I go back off that
08:49and I'm not going by that I'm going by this
08:52so if I click off that click on the build go here go to edit
09:07you see the squares the squares should be one one of them squares is one of them squares
09:13so yeah okay like that
09:27as I said it's got to be all kind of same all kind of similar
09:31as I said there's a few more slabs than I actually wanted so I'm thinking yeah
09:36maybe from here to here probably grass maybe just to kind of cut down on the slabs but I'm
09:42yeah not really because it's not going to be really too much about slabs in there
09:47not really it's not it all depends on how you want to go about doing it
09:51of course still want 3D slabs well I have to have 3D slabs because otherwise it's
09:55not going to look correctly it's not going to look correct so I'm thinking
10:01let me just flick it to the side we'll have a look make sure that the slab
10:06you see the slab it's not actually at ground level
10:17it doesn't really matter and yeah it doesn't matter because
10:24okay what I want to do
10:29I've got to do these ones I know it might not look like a lot to do but it really is a lot to do
10:36so I'm thinking first of all I've got to join all these up so I'm thinking
10:40well that's one way so go here points
10:47not points go to edges click off the face
10:52click the face go to extrude
10:58snap this one to the edge
11:00go here snap that one to the edge
11:15now I need to hide not the plane I need to hide the root
11:23okay so we're just hiding that for a moment because we're not working on that yet
11:33okay so first of all take these four join them now these four need to be joined by this
11:39what I call I need to add the line in that see the line K on the keyboard I need to go from here
11:46to here
11:54I can go back into points
12:00select all the points again press K on the keyboard go from here to here keep the line
12:06dead straight because it when it comes to kind of making the slab believe it or not
12:13that little lines will make the difference off that do these ones
12:23just keep the line dead straight
12:28if you don't do exactly right the first time around then just kind of delete it and start again
12:33so join now take these two join now take these ones join now I said it's kind of you know I said
12:52I do things different to most people so I said I'm trying to do different type of content I'm
12:57trying to show you each way I'm doing it I said I'm holding the up arrow key let's hold the
13:03keyboard and I'm selecting I'm dragging the mouse over let go of the up arrow key press F
13:09that's basically how I'm doing it so you can press the F key go from there to there
13:16press enter I said if you just press the just click the mouse there hold it drag it
13:23press F to finish click off it press K on the keyboard go here
13:29click it go forward make sure the line is corner straight
13:39so yeah come back to this side select these three now go
13:46forward
13:53I don't want that I want this part
14:06go back into wireframe
14:08I just need to check this part
14:14but I know it goes underneath here like a certain distance
14:18I can't quite see where it goes to so
14:23it might go exactly to the edge of it
14:30I said Connor look from this point of view I said all the flaps should be the same point
14:34so what I would need to do now is the kind of click or turn the easy bar
14:43now when I say it's easy it is pretty easy to do it but it takes a few seconds to go around it
14:50well a few minutes to go around it because I need to do every face individually separate
14:56because if I select them if I select all the faces
14:59if I select all the faces it's going to automatically assume
15:04that all the all the faces that I'm doing are the same face so I'll I'll try and do a couple
15:10separate like this kind of stagger it so it kind of knows I'll try it and I'll see if it does it
15:20okay so that actually works so if that works I can do it to all of it
15:37so that way the majority of it is all done at the same time then all I have to do is go in and
15:54fill the ones in the gaps I said I can't select all of them because I know for a fact if I select
16:00everything it's going to try and pull the whole face together and I don't want that
16:13so we can just pick any one we want it doesn't really matter which one we do
16:20so go to somewhere where the circle is so we can kind of see the faces and just move it once
16:31see that was two
16:39I'll do that I said I'm a little bit too far away from it really well
16:48see as soon as it moves you want to stop because it doesn't look like much
16:53don't forget when you do the other ones
17:00so zooming
17:06you see all these ones these are the ones I've zoomed in so you have to kind of select it
17:18make sure
17:21so look at the ones you're actually already doing
17:25so this one's not done
17:31see the really demonstration middle this one's not done this one's not done
17:44this one's not done so it's going to be that one that one that one that one
17:54as I'm just checking the ones
18:00so
18:10you gotta make sure that you don't do the same ones because it's
18:19I said if you do it this way it's a regret because it's going to save me a bit of time
18:31so as I said the reason why I'm telling you to move it once more is because when you move that one
18:40one and then you move this one one it gives you a gap of two and really you only want a gap of one
18:50unless you actually want to go back around the whole model and kind of move everything back to
18:55and I don't want to do that so go back
19:04find your circle
19:18now scale this one one
19:25that scale I don't think that scale did it I don't think that actually did scale back
19:39I'm going to scale it like this so make sure you actually scale it
19:48I said I should end up with a border around it
19:50I didn't actually think I can do that
20:06just select as I said so it's not going to take as long as before
20:11select all the tops and whatever you do don't click the crack
20:20because all you have to come back and fix it
20:33so what we're going to do is attach it to the pavement
20:37to the pavement make it all one object
20:44so when we move the entire plot
20:46everything follows it
20:58I said when you go across it just watch you don't touch the gap
21:02I know it don't look like you might touch the gap
21:06but really it's so easy to click the crack it really is and you really don't want to click on it
21:11because it's going to be a nightmare to sort it out
21:30now you want to exclude it well how far you want to exclude it
21:36let's say a square just one square no more than one
21:41kind of leaving like that so it's got like a little bit of lip on it but not too much of a lip
21:51I said you want it 3D so you want it to be kind of with the money
21:56and now bring back the actual platform
22:07of course you've got to keep this level with your road see here
22:13so what you want to do is click back on the platform
22:15back to set rd to geometry flick it around
22:25that is going to be a bit tricky for this one
22:29kind of flick it this way still tricky I can't quite see
22:35I'm looking for the pavement that's what I'm looking for but I can't actually see
22:39so you see the pavement there look at the top
22:47corner skinny
22:51and the pavement's a little bit wider than that
22:55not much wider but it is a little bit wider
22:59oh no it's not just the way I'm looking at it
23:03so once you get it where you want it you've got to apply the transforms
23:15now basically I've got a physical basically 3d floor
23:20around the building which is kind of yeah you just kind of adds a bit more kind of
23:25you know kind of goodness to the level well that's what I want to tell you
23:33and then of course we need to bring back
23:43of course the road can't go over the pavement so you need to kind of delete all of this
23:50push this pavement back to here
23:55so this curb has to come to the end of here
23:58so I'll sort that out in a moment
24:06maybe if we have another cul-de-sac
24:08there's one way in here maybe when it comes in
24:13yeah don't know yet oh still looking at it coming in
24:23just kind of looking around now so obviously so
24:25we've done the most hard part now the hard part is to select all of the edges
24:32and pull them down to the floor so we've got like a curb around the actual slab
24:40see here look at you see there's no edge on it
24:45of course we've got to join this to this
24:51of course you can't tell that because don't forget to do me a there's gonna be a curb here
24:55this one has to be joined so you have to join that to that building itself
25:01and you can add that in we can add that to it so that's not really too much not too
25:06bothered about that almost everything I'm bothered about this part just from here to here is
25:18where it's going to be level
25:18so it shouldn't be far off it so you shouldn't be able to see much
25:26I don't want a big massive big massive gap in there you know that
25:30because don't forget I've left the gap the curb but there's not really a curb
25:34down that side of the road but I might have to put one in there so
25:40yeah I'm actually going to put it yeah I'm going to put a curb straight in that
25:44so you can't actually see the gap it's not that much of that curb anyway I've got to put it in
25:49anyway but I figured otherwise I've got to join these to these I'm thinking
25:59it's not bad but if you look at the lines you see the lines you don't quite line up with that
26:05not quite so I'm thinking
26:11over the boundary line but it's not if you look at it it's actually on the boundary line
26:19so what it is I didn't pull these down these slabs so these slabs you see where they are
26:28all of this needs to be pulled back just a fraction look about about two squares
26:33between here yeah I'm not having that so I think I'm not doing that because obviously
26:39once I put the curb in here I have to go work around the outside of this
26:43and pull it down to the floor so you can't basically see the actual
26:50underneath the floor basically so what I'm going to do now because this is part this is not part
26:58this so what I need to do is obviously work out where my slabs are going
27:05so of course because this is a different part
27:10and I need to put a line there because I need to split that from the wall
27:16um yeah that's going to be a nice little tricky mission that
27:21so let's go back top view let's look at it so defensive is there so click on this one
27:29so we're going to edit this one he said that's what we're going to do I'm going to snap it to that
27:37really off the wall all the way down
27:42it actually is off the wall all the way down I can't believe that
27:50so what I'm going to have to do here I'm going to modify this bit up just a little bit
27:59I didn't really want to do this not really but
28:02of course if you have to do it you have to do it so what I'm going to do is I'm going to go here
28:06I'm going to snap it
28:10that that's not snappy
28:13yeah snappy
28:23so if that works like that that's totally off the edge
28:29be able to do that
28:32is that touching no
28:37okay I need to hide the building
28:42go back here undo this one
28:47as I don't need the building anyway so I don't really mind
28:50but
28:56this one's going to be a bit of a tricky one to do there
29:02okay so let me just stop this video
29:06as I say you know things can get a little bit tricky as you go along the game level
29:14putting up that building
29:21so
29:26I said I'm going to make sure I click the very very very edge of it because
29:33I can't click the slab
29:37bring back the building back to top view go back to this view look here I closed again
29:46so go here and go
29:55because I'm doing that
30:01it shouldn't be doing that way whatever it's doing
30:08I said all we want to do is snappy
30:13to the edge
30:17snapping is kind of good so that's what we want
30:20now what I want to do I need to snap I need to put a line in here or a line from here
30:32here yeah point the building now what I need to do here is get this one here not that one
30:42so
30:46click this to leave that
30:50back in as I said it's all it's all time consuming work to build it now of course I
30:59don't have to be so specific with it but I really I want to tell you that but truthfully I do
31:06because otherwise it's not actually going to work properly
31:13but this line here now if you go here
31:16of course I don't have to do this really but I am going to do it
31:21and I'm trying to make sure I do it now or later
31:26okay I'm not going to do it now because I have to do it anyway either way so I'm going to go here
31:33now of course if you want to go from here I've got to remember I can't go from there
31:37because it's not a 2d slab I mean it's not a flat slab it's a 2d slab
31:46see the edge
31:51it's got to be good did I do that on the actual on the actual curb
31:57I don't think I actually done that on the curb
31:59no I didn't do it on the curb so I don't have to do it on this curb either
32:04which is kind of great of course I'm going to add a little crack you know down the edge of the curb
32:11I don't need to do that
32:16not really I don't whichever I'll leave that one I need to avoid this one
32:21leave that one I need to avoid this one
32:27hide that one bring this one back
32:31we're just going to fill this little gap in and then we're going to cork it
32:44how did that move
32:48you see that line there that line shouldn't be there
32:50that line shouldn't be there
32:55that should be basically in the brickwork exactly in the brickwork exactly where that should be
33:03so what I need to do is look at this bar
33:06and don't forget I want to allow for the crack in the brick
33:13yeah that's not very good
33:20okay so what we can do there we can go here and I can I can attach the brick to the floor later
33:31because as I said the building is not going to move off the platform
33:36but the building the actual floor in the building
33:40it will change later in the game so I've got to make sure that I do it properly
33:47so I want to flip it to the side
33:50so
33:55ah now I remember I've got to pull it down and I hope
34:03um
34:10as I said it's going to pull down to the actual surface because I've got to remember
34:14um see you see how all the inside out look
34:20even though I made the top now we're going to put the top to the bottom because
34:25I did I actually didn't realize that I've done this point no not that that
34:32and it doesn't matter because obviously either way I'm going to do it but um
34:37it just means that I'll do myself a little bit of extra work
34:40and fill the top of it in of course I have to put this in here I can't not put it in
34:46because it's part of the actual route
34:52otherwise you're gonna get in the room thinking hang on a minute bumblebox
34:57shouldn't there be something on the side of the route like a curb
35:01like a curb
35:04here flip it
35:09turn it around slightly can't can't turn around because because I'm really really close to it I
35:15can't turn it
35:22uh
35:27I said all all of these here because you see these ones here
35:31you should never have to do all these first
35:36then I can just do the top ones
35:40here flip so everything faces me
35:57I said I don't I don't want to give myself too much work to do
36:01but I do want the route to look like it's part of the road
36:11um when you get really little small dots like that if you just click just slightly away from me
36:16like that look it will kind of jump to the closest dot
36:22which is kind of really helpful if it's it's got a dot like that that's kind of really close to you
36:30no I can do that if I want to
36:33I can do that if I want to
36:38why am I doing get off that
36:46so just kind of click the dots and then to do it to do it this way all you do is hold your
36:52power key on the keyboard left side of the keyboard hold it in left click the dots
36:59and then let go of your power key press f that fills it in so of course this pavement is slightly
37:06different to this pavement over here I think oh no it's not there is it it's not on this side it's
37:14on that side and it's on here it's not on there so the pavement is not different you see you see
37:21that you see I've got my slap just slightly above the curb
37:26what this one look it's slightly above the curb it's got like a step and then a step
37:32really well yeah I can push the floor down so it's perfectly flat but I don't want to do that
37:40because I don't want to extrude anyway yeah I just don't want to do it so I know that
37:45yeah there's kind of there's a reason why it's kind of raised above the floor a little bit
37:50okay so I want to cut this video here at the moment so we've built basically the whole entire
37:57area or less I've read my name so we've built the whole scenario so this is obviously the street
38:05so this is the pavement this is the road all I have to do with the actual pavement over here now
38:10pavement over here now because if we go back into standard mode
38:17I need to colour the slabs the same colour as the slabs
38:21I've got to colour this part here up to the wall the same colour as this because it's the same curb
38:28so I want to split that and join it onto that and I need to chop it right there
38:36and then once I chop it all I'm going to do basically take a line tool
38:40put a line down there and kind of chop it and then basically extrude this part down here
38:46delete all of this and then extrude the road down that's what I'm going to do so as you
38:51wait I'll keep that for the next part of the video and then you can come back and watch it
38:55if you want to watch it as I said I am building it from scratch so just in case you're wondering
38:59once I start adding all the colour and the detail and things like that it's going to look 100
39:04100 times better when it's built so anyway as you say thumbs up, thumbs down, subscribe,
39:09thank you very much I really appreciate you watching my videos I really do
39:11and hopefully you'll learn a lot see you soon bye