Royal Bobbles Killer Klowns From Outer Space Baby Killer Klown Bobblehead | #spookyspot 2023
Category
😹
FunTranscript
00:00 Hey, when you gotta go, you gotta go.
00:02 Here's your spooky spot on the Royal Baubles Killer Clowns from Outer Space
00:06 Baby Killer Clown Baublehead.
00:08 [Music]
00:27 [Paper rustling]
00:40 Big fan of Killer Clowns from Outer Space?
00:43 Represent one of the most memorable scenes in film history
00:46 when you get this Baby Clown Toilet Baublehead statue.
00:49 If you consider yourself a horror movie buff,
00:51 then this epic decoration is a must-have.
00:54 My rule of thumb is always check for clowns before you sit down.
00:58 And before we get a closer look at the Killer Clowns from Outer Space
01:01 Baby Killer Clown Baublehead,
01:03 I'd like to send out a big thank you to the folks over at Royal Baubles
01:06 that did provide this sample we could have a look at.
01:08 This is also stocked over at Spirit Halloween,
01:11 either on their site or stocked in shelves in store.
01:14 If you guys are interested to get this one for yourself, it's about $39.99 a piece.
01:18 As well, grab the tape measure, see how tall it stands.
01:20 And while it is actually sitting inside of a toilet,
01:23 it still manages to stand about 6 inches in height.
01:26 Or it's going to be about 15.5 cm tall.
01:30 And then to compare something silly with other scaled baubleheads,
01:33 here's what the Baby Clown looks like with the lollipop stab, Sam,
01:37 that we've already had a look at.
01:38 Here's also as well what it looks like with the shape,
01:40 Michael Myers standing behind the bush.
01:42 So it's going to be size-wise almost about the same as Sam,
01:46 but not nearly enough the height of the shape.
01:49 Being a fan of the Killer Clowns,
01:51 I was really excited to get the Baby Killer Clown in Toilet as the baublehead.
01:55 And overall, I think it's a nice-looking bauble.
01:57 The only thing I will say though about it is with the sizing of the head,
02:01 I'm only going to rock it back and forth just a bit
02:03 so you guys can see probably what I'm talking about here.
02:05 I feel like while it's cool to have it sitting inside of a toilet,
02:08 and of course it plays really heavily on that scene in the movie,
02:11 the thing about it though is with the toilet being only the size that it is,
02:15 the base of the toilet nearly not being wide enough,
02:18 I feel like there really isn't enough stability.
02:20 I mean, it's fine and good if you're going to be putting it on the shelf, for example,
02:23 but the moment you start to move the head back and forth,
02:26 you may not even notice it for yourself,
02:28 but the toilet just rocks ever so slightly.
02:31 I think it would have been nice if they could have maybe used, say,
02:34 a similar square-shaped base as some of the other earlier looked-at baubleheads,
02:37 just to give a little bit more stability.
02:39 They could have given like the floor, for example, of inside the bathroom,
02:42 just to prevent again that toilet from rocking back and forth.
02:45 Because again, there's so much weight really happening here
02:47 for the top of the Baby Killer Clown's head
02:49 that you're then asking a lot of such a small space here for the toilet's base.
02:53 If we flip this around, actually turn this, making sure it's facing the right way.
02:56 There we go. There we go.
02:58 You can see there's a QR code. Feel free to scan that if you'd like.
03:00 You can also go as well to www.royalbaubles.com.
03:03 Check out their full lineup, not only for the 2023 Halloween season,
03:07 but also as well the baubleheads that they're selling all year round.
03:10 Also as well, like the coloring of this is really nicely done.
03:13 Of course, you've got the really pearl white coloring of the toilet.
03:16 The tank has the water, has a little bit of a smear.
03:19 I've got, notice here on the side of mine at least,
03:22 probably just a little bit of extra paint that found its way onto the side.
03:25 You've got the little flushing lever there as well.
03:27 It looks to be almost a wood grain toilet seat.
03:30 I don't know anyone that still has a wood grain toilet seat.
03:33 Does anybody have? You don't have to really.
03:35 Let me know down below in the comment section.
03:37 Or are you one that has the old kind of carpeted cushion toilet seats?
03:41 I had one of those when I was growing up.
03:43 I'm glad those are all kind of been done away with.
03:45 Now inside the toilet is not normally a place where to have you guys all look.
03:48 You can see like it's kind of more of a dark interior.
03:50 So you really don't know what's inside the toilet behind it,
03:53 beside the killer clown itself.
03:54 And of course the killer clown is protruding out.
03:56 Don't even really know how a head this big could fit out this size of a toilet rim.
04:00 But you manage to still get a very terrifying looking baby clown.
04:04 Fangs adore really on the top and the bottom of the mouth.
04:07 The inside of the mouth, of course, is painted black.
04:09 They have done smartly here to kind of just recess the sections of the black.
04:12 So far enough away, it actually kind of looks like there's a lot more depth to the mouth than there actually is.
04:17 They obviously could have not had any way of just having the teeth sculpted and floating in space.
04:21 Because of course, being that this is cast and made in resin,
04:24 the likelihood would be very high that the teeth would likely break.
04:27 The teeth have been what teeth we actually have all mangled on the top and bottom.
04:31 And painted really well here.
04:33 Kind of more of an off yellowish beige.
04:35 Of course, you've got the tops and the bombs of the lips painted in very nice bright pink bubblegum color.
04:39 A very large clown nose.
04:42 Probably you would not want to be normally squeezing a clown nose when you've got a clown this sinister.
04:45 And you've got these tiny little squinted eyes.
04:47 Look at those eyes.
04:48 They're like almost doll's eyes.
04:50 Tops and bombs of the eyelids painted in not quite the same pink as the gums.
04:54 But kind of almost like a more lighter violet color.
04:57 Some additional pastel blue has been nicely added there as well.
05:00 And I really like as well the way they've sculpted and painted the hair.
05:03 The paint is actually, when you look at all the rest of the clown's face, the shiniest aspect of it.
05:07 The clown's nose, I suppose, is also equally shiny.
05:10 And it seems like it's almost a very similar color that they would have used for the hair and the nose as well.
05:14 Fairly accurate to the way it would have been in the movie.
05:16 It is a really interesting looking bobblehead.
05:18 Now, you probably saw at the beginning of this review how carefully these things always get stored away.
05:22 They're first of all shipped inside styrofoam trays.
05:25 And once you remove those, you have to take the plastic off.
05:27 And then the last thing you have to do, which was one of the few times I've actually struggled to get that freed.
05:32 There's a little bit of additional batting.
05:35 A little thing, foam strip, that they actually wrap around the neck to prevent the head from moving around freely.
05:40 But I noticed on mine at least, and you even noticed that being in the video, that it was kind of snagged inside the spring.
05:47 I was really worried.
05:48 At one point I even debated the idea of actually just cutting it because I didn't want to have to pull it too far
05:53 and actually crack the neck in the process.
05:55 Because again, it's all made of resin.
05:57 But lucky, it finally freed itself.
05:59 And I was able to get the bobblehead to bobble.
06:01 Now again, like the bobblehead bobbles successfully.
06:03 I've never really had any issues with the bobbleheads even being able to freely move.
06:06 The thing about it again though, is the fact that you've got such a large head, a very skinny neck,
06:11 and a very small looking base for the base of the toilet.
06:14 My only real concern when it comes to displaying this, is the fact again, like it's going to be rocking back and forth.
06:19 Now I'm probably exaggerating a little bit more than what I'm doing right now.
06:22 But you can see just by moving it alone, how maybe just adding just an extra little bit of footprint space around the side of the toilet
06:29 would have probably just given a little bit more stability when it comes to the Killer Clown.
06:33 Because I'd like to hate, I hate to think that this was actually sitting on the shelf for example,
06:37 and something that had banged the head for example, and maybe this had fallen.
06:40 I mean obviously these are being cast in resin, so the last thing you would want to have is break.
06:44 The first thing I'm sure would be certainly broken on the clown is the neck that's actually connecting from the base,
06:49 or the top seat of the toilet to the top of the head.
06:51 But it is though, a really interesting looking clown.
06:54 We haven't really gotten ourselves the baby Killer Clown in many collectibles.
06:58 They always seem to really go right away to the two-legged clowns.
07:01 I'm kind of interested, I'm happy to see that Royal Baubles did something a little bit differently
07:05 by releasing a baby Killer Clown, the one that's sitting inside the toilet.
07:09 Sure yeah, I would like to get more of the baby clowns from that bathroom scene produced as bobbleheads from Royal Baubles,
07:15 but then I have to kind of think of the mechanics of that.
07:17 If you wanted to have for example the two heads that are sticking out from the medicine cabinet,
07:20 then they have to construct an entire back wall,
07:22 and there's no way you'd have the proper stability to hold two necks that are sticking out from the medicine cabinet door,
07:27 and then have a bobbling feature incorporated.
07:29 So that's just a big no.
07:31 Then there's also the laundry hamper.
07:33 Now the laundry hamper could work, but the problem with that of course is now instead of just one baby Killer Clown,
07:37 you've now got to worry about two.
07:39 And is both of them going to have the little spring bobbling feature?
07:42 Yeah, I guess in the end of it, it's probably the best one that they could have gone with,
07:45 is the one that sticks its head out from the toilet.
07:48 Now in the movie, it sticks its head out a lot longer.
07:50 The neck is a lot longer than what we actually get right here, for again, just the designing end of things.
07:54 Being that this is made of resin, it'd be impossible for them to give it the exact same length of what the clown would have appeared in the movie.
08:00 So this sort of looks like the baby clown when it's first coming out of the toilet.
08:04 Although the head is a lot bigger in this case.
08:06 There's no way really to be able to fit it out of the toilet,
08:08 but obviously this is always the case with these bobble heads,
08:10 that the head has to be bigger than the rest of the body to incorporate that spring rocking feature.
08:15 The thing though still about this is while it was nice to see them actually do this in a toilet,
08:19 I would have liked still if they could have incorporated the rectangular or square base.
08:23 We've already gotten it lots of times already with the Royal Bobbles bobble heads,
08:26 especially with a toilet like this and with the large head that the baby clown does have.
08:30 Just a little bit of an additional footprint space, so the toilet wouldn't be rocking back and forth.
08:35 Other than that though, I really like the coloring that they've gone with for here.
08:37 And obviously, we really don't have, as mentioned in this review, a lot of examples of the baby killer clowns from that bathroom scene.
08:43 So hey, I'm really open to the idea that we actually got one finally from the folks over at Royal Bobbles.
08:48 I think overall it turned out really good.
08:50 It's nicely done here and it has still a rocking bobbling feature.
08:53 Just again, be a little bit careful when doing this one over maybe some of the other ones we've already looked at.
08:58 Big thank you once again to the folks over at Royal Bobbles that did come through and provide this sample of the killer clowns from Outer Space,
09:04 baby killer clown in toilet that we see in the bathroom scene.
09:08 What do you guys think of this bobble head?
09:10 Could you guys see yourselves picking this up for yourself?
09:12 And what's your favorite scene in the killer clowns from Outer Space?
09:15 Let me know down below in the comment section.
09:16 Does it happen to be the bathroom scene or is it another scene?
09:19 Let me know down below in the comment section.
09:21 Also as well, if you guys enjoyed this video, hit it with a like.
09:23 If you guys are loving the content you guys are seeing and you'd like to certainly stick around for more,
09:27 we are going to be looking at a bunch more spooky spots.
09:29 There's still lots of stuff to go through.
09:31 I mean, you may not be able to see it, but I can see it.
09:33 There's a whole lot of things that I still want to look through during the month of Spocktober.
09:37 So of course, make sure that you're not missing on any of that.
09:39 Keep your ghoulish peepers peeled to this channel at all times because Monday to Friday and even sometimes still on the weekends,
09:45 there's usually two videos popping up a day.
09:48 Of course, as always, guys, thanks for watching.
09:50 See you guys next time.
09:52 [outro music]