The development of bee packages. The work №5: The first work on the conclusion of queens.
Пчеловодство. Летние работы на пасеке. Развитие пчелопакета. Работа №5: Первая работа по выводу маток в пчелопакете таким методом применима, если пчелопакет начали развивать в более ранние сроки, и до главного медосбора еще достаточно времени, чтобы нарастить силу до главного медосбора и успеть сделать отводок пчел с печатным маточником.
Пчелопакеты бакфаст.
В этом методе по выводу маток происходит вывод маток без переноса суточных личинок в мисочки, что максимально упрощает работу по выводу маток, и не требует специальной подготовки и других промежуточных осмотров, - самый простой метод по выводу маток для начинающего и не только, пчелы сами заложат маточник, в присутствии плодной матки в улье.
Beekeeping. Summer work in the apiary. The development of bee packages. The work №5: The first work on the conclusion of queens in bee packages by this method is applicable if the bee packages began to develop at an earlier date, and before the main honey crop has enough time to build up strength before the main honey yield and time to make strains of bees printed liquor.
Buckfast bee packages.
In this method, the withdrawal of queens occurs conclusion queens without transfer daily larvae in bowls, that greatly simplifies the work on the conclusion of queens, and requires no special training and other intermediate examinations, - the easiest method for the withdrawal of queens for a beginner and not just the bees themselves will lay liquor in the presence of fetal uterus in the hive.
To do this, move all the frames with brood as open as possible - it is 4-5 frames in the upper body and one feed with honey and pollen in the lower left frame housing with a printed brood (at least 3) and fetal uterus, and also feed in the nest not less than 8 kg 2 framework in the lower housing to make extension frames with sushyu or honeycombs for the bees and the uterus, the upper and lower housing divided foil width greater than the body, a film is cut opening between 2 and 3 the frame near the rear wall for the passage of bees and on the hole grid divider falls to fetal uterus is not passed to the upper body. During the week, after the transfer of frames with open brood, bees in the upper body will begin to lay the queen cells in the younger larvae located in the central part of the frames with brood, it happens that lay queen cells like swarms, which are located on the sides and bottom of the frame, these queen cells You can then break down.
If the bees in the upper body lay liquor / ki, then after 7-8 days I will make cuttings taking one frame of brood from the upper body with bees and printed queen cells, not much by loosening the main family.
But it happens that bees do not lay the queen cells. Although bee swarms are not in the mood, but the strength of bee colonies in the state predroevom as leaves many young bees in the hive for 8-9 frames of brood in nature now being supportive of bribes.
This method for the withdrawal of queens and should not be used if the bee colonies swarm entered the state, as if the uterus is beginning to reduce egg production and this can be seen in a small circle with open brood or seeding on the framework, and one side of the frame can be 2-3 circle brood - and this is the first sign of the entrance of bees swarming in the state and there is no public swarm queen cells (second feature), then the family will be sure to swarm. And the bees also reduce the rate on the detuning honeycomb or completely stopped building.
The hive sunbeds can be in your pocket with the tap hole to postpone the frame with open brood and split a partition on the entire height of the housing, in the partition cut out a rectangular hole 5x7 cm and the hole is fixed partition grille for the passage of bees. On both sides of the walls are put two honey. Oh I saw the partition in the apiary Gaidar VA and he also enjoyed, but there he puts vaccination frame with queen cells in the education.
Next inspection: https://www.youtube.com/watch?v=fdFQnPpDT-U
Пчелопакеты бакфаст.
В этом методе по выводу маток происходит вывод маток без переноса суточных личинок в мисочки, что максимально упрощает работу по выводу маток, и не требует специальной подготовки и других промежуточных осмотров, - самый простой метод по выводу маток для начинающего и не только, пчелы сами заложат маточник, в присутствии плодной матки в улье.
Beekeeping. Summer work in the apiary. The development of bee packages. The work №5: The first work on the conclusion of queens in bee packages by this method is applicable if the bee packages began to develop at an earlier date, and before the main honey crop has enough time to build up strength before the main honey yield and time to make strains of bees printed liquor.
Buckfast bee packages.
In this method, the withdrawal of queens occurs conclusion queens without transfer daily larvae in bowls, that greatly simplifies the work on the conclusion of queens, and requires no special training and other intermediate examinations, - the easiest method for the withdrawal of queens for a beginner and not just the bees themselves will lay liquor in the presence of fetal uterus in the hive.
To do this, move all the frames with brood as open as possible - it is 4-5 frames in the upper body and one feed with honey and pollen in the lower left frame housing with a printed brood (at least 3) and fetal uterus, and also feed in the nest not less than 8 kg 2 framework in the lower housing to make extension frames with sushyu or honeycombs for the bees and the uterus, the upper and lower housing divided foil width greater than the body, a film is cut opening between 2 and 3 the frame near the rear wall for the passage of bees and on the hole grid divider falls to fetal uterus is not passed to the upper body. During the week, after the transfer of frames with open brood, bees in the upper body will begin to lay the queen cells in the younger larvae located in the central part of the frames with brood, it happens that lay queen cells like swarms, which are located on the sides and bottom of the frame, these queen cells You can then break down.
If the bees in the upper body lay liquor / ki, then after 7-8 days I will make cuttings taking one frame of brood from the upper body with bees and printed queen cells, not much by loosening the main family.
But it happens that bees do not lay the queen cells. Although bee swarms are not in the mood, but the strength of bee colonies in the state predroevom as leaves many young bees in the hive for 8-9 frames of brood in nature now being supportive of bribes.
This method for the withdrawal of queens and should not be used if the bee colonies swarm entered the state, as if the uterus is beginning to reduce egg production and this can be seen in a small circle with open brood or seeding on the framework, and one side of the frame can be 2-3 circle brood - and this is the first sign of the entrance of bees swarming in the state and there is no public swarm queen cells (second feature), then the family will be sure to swarm. And the bees also reduce the rate on the detuning honeycomb or completely stopped building.
The hive sunbeds can be in your pocket with the tap hole to postpone the frame with open brood and split a partition on the entire height of the housing, in the partition cut out a rectangular hole 5x7 cm and the hole is fixed partition grille for the passage of bees. On both sides of the walls are put two honey. Oh I saw the partition in the apiary Gaidar VA and he also enjoyed, but there he puts vaccination frame with queen cells in the education.
Next inspection: https://www.youtube.com/watch?v=fdFQnPpDT-U