Novacel® 4228REF, the best protection for LASER Fiber & LASER CO2 operations!
- il y a 10 ans
The Novacel® 4228REF has been designed for both LASER Fiber and CO2 cutting process and has been approved by the major manufacturers of LASER cutting machines as Bystronic, Salvagnini and Trumpf.
Novacel® 4228REF is a 100µm polyolefin UV treated film, within outdoor resistance goes up to 6 months. The Novacel® 4228REF has a unique light grey colour which easily identifies product that is suitable for cutting with LASER Fiber and LASER CO2 machines. Novacel® 4228REF is available in 1000 and 500 meters. A specific print shows the correct direction for sheet metal shaving and abrasion.
Many advantages of the Novacel® 4228REF make all the difference:
♦ Protected sheet metal can be LASER cut in a single pass with Fiber or CO2 technologies
♦ Film does not separate from the surface during the LASER cutting operation, preventing the formation of air bubbles.
♦ Minimal shrinkage and clean edges
♦ Outdoor resistance of 6 months
♦ The film may be easily removed in one piece, with no blocking or tearing
The Novacel® 4228REF cuts down on LASER-cutting time and maintains surface integrity throughout the cycle of various mechanical transformations (bending, backing, stamping, forming, etc.).
The film's specific characteristics allows for automated protected sheet-metal handling while avoiding any risk of taking two plates at the same time.
The Novacel® 4228REF is totally free of any raw materials that could produce hazardous outflow to the operators or equipment during LASER cutting operation.
Novacel® 4228REF is recyclable, as it is with the entire NOVACEL range.
Use the Novacel® 4228REF for both LASER Fiber and CO2 cutting technologies!
To get samples or to order, please contact our commercial department at 02.32.82.72.22 (France), +33.2.32.82.72.33 (export) or by email: novacel@chargeurs-protective.com. For convenience, complete and send us the form available on the Novacel website (http://www.novacel.co.uk/en/services/free-recommendation.html).
Novacel® 4228REF is a 100µm polyolefin UV treated film, within outdoor resistance goes up to 6 months. The Novacel® 4228REF has a unique light grey colour which easily identifies product that is suitable for cutting with LASER Fiber and LASER CO2 machines. Novacel® 4228REF is available in 1000 and 500 meters. A specific print shows the correct direction for sheet metal shaving and abrasion.
Many advantages of the Novacel® 4228REF make all the difference:
♦ Protected sheet metal can be LASER cut in a single pass with Fiber or CO2 technologies
♦ Film does not separate from the surface during the LASER cutting operation, preventing the formation of air bubbles.
♦ Minimal shrinkage and clean edges
♦ Outdoor resistance of 6 months
♦ The film may be easily removed in one piece, with no blocking or tearing
The Novacel® 4228REF cuts down on LASER-cutting time and maintains surface integrity throughout the cycle of various mechanical transformations (bending, backing, stamping, forming, etc.).
The film's specific characteristics allows for automated protected sheet-metal handling while avoiding any risk of taking two plates at the same time.
The Novacel® 4228REF is totally free of any raw materials that could produce hazardous outflow to the operators or equipment during LASER cutting operation.
Novacel® 4228REF is recyclable, as it is with the entire NOVACEL range.
Use the Novacel® 4228REF for both LASER Fiber and CO2 cutting technologies!
To get samples or to order, please contact our commercial department at 02.32.82.72.22 (France), +33.2.32.82.72.33 (export) or by email: novacel@chargeurs-protective.com. For convenience, complete and send us the form available on the Novacel website (http://www.novacel.co.uk/en/services/free-recommendation.html).