Scratchbuild Quadcopter %28Xcopter%29 Hover testing Stabilizing with KK board v3.0
- 11 years ago
=======================================
Aircraft Specifications
=======================================
Frame: - Hand made with aluminum circular pipe section and plate.
Motor to motor length 70cm.
It is made in such a way that it allows cheap & easy repair if we crash and accept the future mods/upgrades.
Motor: - DYS A-2212/10 1400kv Brushless Motor.
Each motor produces 600g thrust on full throttle @110W
Propellers: - SF 8x4.5 and 8x4.5R 1pair each
ESC: - DYS 30A Flashed with latest SimonK firmware
Allows high refresh rate which is good for multirotors.
Battery: - ZIPPY Flightmax 5000mAh 3S1P 20C Lipo
It gives a flight time of 15min
Radio: - TURNIGY 9XR with FrSky DJT and V8FR-II HV receiver
Aircraft Specifications
=======================================
Frame: - Hand made with aluminum circular pipe section and plate.
Motor to motor length 70cm.
It is made in such a way that it allows cheap & easy repair if we crash and accept the future mods/upgrades.
Motor: - DYS A-2212/10 1400kv Brushless Motor.
Each motor produces 600g thrust on full throttle @110W
Propellers: - SF 8x4.5 and 8x4.5R 1pair each
ESC: - DYS 30A Flashed with latest SimonK firmware
Allows high refresh rate which is good for multirotors.
Battery: - ZIPPY Flightmax 5000mAh 3S1P 20C Lipo
It gives a flight time of 15min
Radio: - TURNIGY 9XR with FrSky DJT and V8FR-II HV receiver