88' Cagiva WMX 250 Basketcase ReBuilt

my 1988 Cagiva $200 basket case before and after shots. hi po filter, honed carb, Boysen duel stage reeds replace 8 petal, same as in RM KX 500s, 14.3:1 compression ratio, ceramic piston top and powervalve, Teflon coated skirts, polished rod, ported, polished cyl, cyl has raised port timing but done on piston, FMF Powercore from CR250, stock pipe but welds inside smoothed and deburred, powervalve matched to exhaust port, gaskets matched, thinest gasket used, combustion chamber/head ceramic coated and milled, splitfire plug, reed screws ground 1.3 mm for no flow restriction, new HD spokes on new Excel Rims, 18 rear, Trelleborg light tires, WP suspension, stiffer springs, MX track valving, Custom made aluminum skid plate like no other (not Shown), several parts/brackets fabricated from scratch,all new bearings, seals, brakes all rebuilt, 13/14/15 front with 50 tooth rear sproket, kickstand with safety catch tie, custom finish on engine sides, uses AV Gas, Fast as Hell. 218 lbs