Title
megaphone awaz bahut kam hai audio problem | megaphone repair | megaphone loudspeaker repair
about
doston khempur repair channel Mein aapka swagat Hai Aaj mere pass Ek kharab Mega phone aaya hai aur is Mega phone mein problem yah hai ki ismein awaaz bahut kam a rahi hai aur iska speaker Andar Se Tuta Hua Hai to Aaj ham is megaphone ko repair Karenge aur iski Awaaz ko Sahi Karenge Agar aapke megaphone mein bhi ISI type ki koi problem hai to is video ko aap Jarur Dekhen yah video aapke liye hai video Pasand Aaye To like Karen doston ke sath share Karke channel ko support Jarur Karen thank u
Instagram
https://www.instagram.com/pro__shahnawaz/
Playlist
Bluetooth speaker https://dailymotion.com/playlist/x6q9yv
#khempurrepair
#megaphoneawazbahutkamhaiaudioproblem
#megaphonerepair
#megaphoneloudspeakerrepair
megaphone awaz bahut kam hai audio problem | megaphone repair | megaphone loudspeaker repair
about
doston khempur repair channel Mein aapka swagat Hai Aaj mere pass Ek kharab Mega phone aaya hai aur is Mega phone mein problem yah hai ki ismein awaaz bahut kam a rahi hai aur iska speaker Andar Se Tuta Hua Hai to Aaj ham is megaphone ko repair Karenge aur iski Awaaz ko Sahi Karenge Agar aapke megaphone mein bhi ISI type ki koi problem hai to is video ko aap Jarur Dekhen yah video aapke liye hai video Pasand Aaye To like Karen doston ke sath share Karke channel ko support Jarur Karen thank u
https://www.instagram.com/pro__shahnawaz/
Playlist
Bluetooth speaker https://dailymotion.com/playlist/x6q9yv
#khempurrepair
#megaphoneawazbahutkamhaiaudioproblem
#megaphonerepair
#megaphoneloudspeakerrepair
Category
📚
LearningTranscript
00:00Hello, my name is Khempur Revere YouTube channel.
00:04My name is Mini Megafone.
00:08Mini Megafone is called Megafone.
00:12This is the problem.
00:16This is the condition that you can see.
00:20This is the sound.
00:24This sound is not coming.
00:28This sound is not coming.
00:32This sound is not coming.
00:36This sound is not coming.
00:38This sound is not coming.
00:40I have a way to check it.
00:44This is the plus wire.
00:46This is the negative volt.
00:48Minus wire.
00:50This is the same way to check it.
00:52I have a supply.
00:54I am on it.
00:56This sound is not coming.
00:58This sound is not coming.
01:00This sound is not coming.
01:02but the sound is not coming.
01:06If your name is not coming,
01:08the sound will suck.
01:10This sound is not coming.
01:12It is the problem.
01:14So, we can see this sound will become a problem.
01:16we will repair and see what problem is
01:19so first of all, we will open it
01:22and we will open it
01:24so we will open it
01:27here are 2 screws
01:29we will open it
01:32so we will open it
01:35we will open it
01:37and we will open it
01:40so we will open it
01:43I am going to repair shop
01:47so sound is not clear
01:51so I don't want to give up
01:54which I want to give up
01:56which I want to give up
01:58which I want to give up
02:00I will give up
02:05I will give up
02:07and I will give up
02:09because I will give up
02:11I will give up
02:13the main thing is the magnet
02:15which I will give up
02:17I will give up
02:19here screw is also tight
02:21here screw is also tight
02:23here side
02:25here is a socket
02:29which is also made
02:31but wire
02:35is a small
02:37so
02:39if I am going to go
02:41here
02:43it will be
02:45here
02:47here
02:49here
02:51here
02:53here
02:55here
02:57here
02:59here
03:01here
03:03here
03:05here
03:07here
03:11here
03:13here
03:15here
03:17here
03:19here
03:21here
03:23here
03:27here
03:29here
03:31here
03:33here
03:35here
03:37here
03:39here
03:40and
03:53here
03:55here
03:57here
03:59but this here is the point.
04:17When you have a script,
04:18we have no script.
04:23We use a script to fix these questions.
04:28If you don't have a risk, you will not be able to take a risk, so the risk will not be able to take a risk.
04:35I will leave this connection and after the connection, we will be able to cut it.
04:44So first, I will cut this wire to cut it.
04:48I will place this wire later.
04:51I will use this fabric to cut it.
04:54If you want this type of tube, you can also use this wire to cut it.
04:59But these tubes are very hard to work.
05:03Because it was the same way.
05:06But it was the same way.
05:09It was the same way.
05:11So I will use this wire to cut it.
05:14I will use this wire to cut it.
05:29I will use this wire to cut it.
05:33I will use it.
05:53and this is the thing I have to say is that the heavy quick is not going to go to the coil
05:59which is not going to go to the coil which is going to be jammed, so this is the right
06:03chip. Now I will see how it works, how it works, how it works. The low sound is now
06:12the same type of the type of the type of the type of the type of the type of the type
06:17we are in the next step to follow.
06:25We are connected to two wires here and we will remove this wire.
06:30We will remove this wire.
06:32When we put this wire to the sound,
06:36the way we will remove this wire.
06:38We will remove this wire.
06:40We will remove this wire.
06:44This wire will remove this wire.
06:45Now you can put it in the middle
06:48Just like you have left a little bit
06:51Good way
06:54Now we have the next step
06:57Here we have 3 holes
07:00You can put it in the middle
07:03Now we have to put it in the middle
07:06Because we have to put it in the middle
07:09Now we have to put it in the middle
07:12You can put it here
07:14Here I will put it in the middle
07:16Now we have to put it in the middle
07:22Here we have to put it in the middle
07:24Now we will put it in the middle
07:28Now you have to put it out
07:31So here we need to put it down
07:34Donc its attire
07:35Yes and this leg
07:37We are in the middle
07:39This wall
07:41So if we are tight, then we will be tight.
07:44So I have to keep it here.
07:47Now we have three bolts.
07:49First of all, we have these bolts tight.
07:52We have to keep it tight.
07:54We have to keep it tight.
07:57We have to keep it tight.
08:11So we can keep it tight.
08:23Okay.
08:25Now we have to keep connecting that to our side.
08:32Now we have to keep connecting.
08:35Now we are in green color.
08:40This wire is a little bit longer than this wire, so this wire is a little bit longer than this wire.
08:48This wire is a little bit longer.
09:01I have two wires on speaker, and now I have power wire.
09:06But the power wire is negative and positive,
09:11this wire is small.
09:15So we will also have two wires.
09:18Black wire is here,
09:21but red is small.
09:25But we will change both.
09:27Red wire is here.
09:31and I have to add the wire to this place and I will not add red to this place.
09:38So this is green colour.
09:40So you have to add two colours.
09:42And then you can see that this is a colour.
09:46Two colours are always a colour.
09:48So the other one is black.
09:50So now you can see that you can see that you can see that black and green is negative.
09:59…and green positive
10:05…so we can remove this side
10:07…this side is a megaphone
10:09…and you can remove it
10:12…and we remove this side
10:17…you just give this side
10:20…no Tür
10:23…and we remove it
10:25…and the other side
10:27I can see that both screws are coming from here.
10:31Now we have to do this screw with tight because there is no other problem.
10:37This is wiring.
10:39This speaker has gone.
10:42Now we have to do this screw with tight.
10:48We have to do this code.
10:54which is the code that is made.
10:56This is my service code,
10:58this is the code that you ignore.
10:59This is the communication.
11:02This is the customer of the customer,
11:03where is the address,
11:04name and name.
11:05So, there are two wires.
11:07Now, next step is,
11:09we are wiring now.
11:12The green wire is the same.
11:15We will go back.
11:16Under, inside we will not go back.
11:18And again, we are black.
11:22So I will pull it out
11:25Let's see that this wire
11:26It can't put it out
11:30So I will pull it out
11:32This side is changed
11:34Now we have to pull it out
11:38So I will pull this in I will pull it out
11:42I will pull it out
11:44And now I will pull the wire on the green
11:49Pull this wire
11:50okay
11:52okay
11:54would be this way
11:56would be this way
11:58I would put the wire
12:00and now
12:02we have to move
12:04into the left
12:06and we are
12:08on the left
12:10so
12:12this way
12:14doesn't
12:16so we have black color to this side
12:26this side
12:27this side
12:28this video is how you feel
12:30you can comment and if you like this video
12:34please support
12:35and
12:46and
12:47and
12:48and
12:52and
12:54and
12:56and
13:03This is a good way to connect with the battery and negative positive, otherwise the card is wrong.
13:10If you put the card 100% wrong, then the card is wrong.
13:14Now, the power button is pressed and pressed.
13:19The sound of the first time is done.
13:21The sound of the megaphone is done, but the sound of the sound of the megaphone is done.
13:25turn on
13:27so it's
13:28a
13:28a
13:29a
13:30a
13:42a
13:43a
13:44a
13:45a
13:46a
13:48a
13:49a
13:50a
13:51a
13:52a
13:53a
13:55a
13:56a
13:57a
13:59a
14:04a
14:07-
14:08a
14:10a