A1-BubbleBox
A1-BubbleBox
  • 2 days ago
Door the 3 moons door 04 cycles call
Elevator shaft and glass windows

download free
https://skfb.ly/prUUx

download free
https://mega.nz/file/supxzDaa#JusHIAG4j90drS2_iH-LofdVPxFhAF4b8rgrJxTg06o

Transcript
00:00Hello and welcome to the FreeMoon CycleCell.
00:04Now what is the FreeMoon CycleCell?
00:06Wow!
00:08If you look at my videos about the doors,
00:11this is the door that's actually on the show here.
00:17If you download the door number 4,
00:19this is door number 4.
00:21Go into here.
00:23I'll show you what a frame door is.
00:25Now if you look at the actual door,
00:27as if it wasn't a door,
00:29it's actually something else.
00:31Now I've left these little points here.
00:33These points here, I'll explain it
00:35when I show you the whole thing.
00:37Now as I told you, on the door,
00:39this here is a gold band to go around the door.
00:42And this one here is a gold band
00:44to go around the door.
00:46Now, in a minute I'm going to show you something
00:49which you might be a little bit impressed.
00:52Tell you again, you might not be.
00:54Go around the edge of the door like this,
00:56not like that.
00:59Don't check the middle ones.
01:01Just do that.
01:02You want to do both sides.
01:04So you click it to the side.
01:06You turn the snap in on.
01:08Go to extrude.
01:10Zoom in.
01:12Pull it out maybe once, maybe twice.
01:14It depends on what you're doing.
01:16So if it's a door frame,
01:18I recommend just pulling it out once on the door frame.
01:20If you want to do that,
01:22I hope you don't have to do that.
01:24And don't forget, if you're going to do it on a door frame,
01:27make sure you pull these two parts out of it.
01:29Otherwise it's not going to look quite right.
01:31Because you're going to have a little skinny piece of wood
01:34in between the middle.
01:36So all you would do is obviously just undo it.
01:39Hold your arrow keys, left on the keyboard.
01:41Click that.
01:43Don't forget you'll do it on both sides of the actual framework.
01:47Go up here and go to snap in once.
01:50Snap in twice.
01:52Now that's too many.
01:55In order to do that, just zoom in.
01:57And then just click it once.
01:59Click it twice.
02:01Otherwise it's going to snap the whole square.
02:04We don't want that much because that's too much for a door frame.
02:06So I think you're going to click on the door.
02:08This is me kind of modifying the door.
02:10Now of course, you can click on the edges if you want to.
02:14Go around the edge.
02:16And then you can go here and you can bevel it.
02:18So I think I don't want to bevel the edges.
02:22Now of course, what you would do is go here.
02:25Select all the edges.
02:27Right click.
02:29Go to bevel and then beveling.
02:31I don't like little kind of smooth edges around my door frame.
02:34I don't like it.
02:36I'm saying if it's a nice piece of square wood, I want a nice piece of square wood.
02:39That's how I want it.
02:41Anyway, I am here to talk about that exact part.
02:44Not the beveling part.
02:46The actual door frame.
02:48I was thinking what happens if I took the door frame.
02:51This one here.
02:53What happens if I copy and paste it.
02:55So I'm going to go in here.
02:57Now if I copy and paste it.
02:59Copy it.
03:01Paste it.
03:03So I'm going to hide this one because I don't need it now.
03:07Go here. Copy it.
03:09Right click on it. Copy it.
03:11Right click again.
03:13On the box.
03:15Paste it.
03:17Now if you take this one.
03:19Go to top view.
03:21Leave this one here.
03:23Don't forget what you want to do when you click it.
03:25Move it to here.
03:27And now click this.
03:29Don't forget to turn it around.
03:31Because we've got a back and a front.
03:33Turn it around so we've got a back and a front.
03:35I'm going to line it up.
03:37Into the best of your ability.
03:39Something like that I suppose.
03:41Or like that.
03:43As I said sometimes it can be a bit tricky.
03:45To get it perfectly flat.
03:47Once you do that click the two of these.
03:49Right click it.
03:51Copy. Right click it.
03:53Now you click paste.
03:55When your mouse stops messing around.
03:57Go here. Paste it.
03:59As I said sometimes my mouse messes around.
04:01I do apologise for it.
04:03Click here. Twist it.
04:05So now we've got some on the back and some on the front.
04:07As I said.
04:09Just kind of tweak it around a little bit.
04:11You do want it perfectly flat.
04:13Perfectly square.
04:15Something like that.
04:17Once you've done that.
04:19Go back and look at it.
04:21It definitely looks different.
04:23Don't forget it was a door.
04:25So now we select all these.
04:27Go here.
04:29Join it.
04:31Select one piece.
04:33So what we want to do.
04:35Go here. Edit.
04:37Now of course.
04:39We're going to put a wall.
04:41Along the sides here.
04:43What you want to do is go in this gap.
04:45And delete the faces.
04:47You don't need them.
04:49Now of course.
04:51If you're watching the video.
04:53And you're watching how to make.
04:55This is exactly how you make it.
04:57So as I said.
04:59It all started originally from a door.
05:01If you watched the first video of the door.
05:03As I said.
05:05What you want to do is zoom into this.
05:07And you want to click.
05:09Hold your power key on the keyboard.
05:11And just click all the faces.
05:13Click all of them.
05:15Because you don't want to.
05:17So of course.
05:19If the gap is big enough.
05:21You can just hold it and select it.
05:23Like that.
05:25If you want to do it that way.
05:27Left click the mouse.
05:29Hold it and drag it.
05:31Sometimes it works great.
05:33Sometimes you end up selecting things you don't want to select.
05:35So don't forget you do that.
05:37All around the mechanism.
05:39Around the box.
05:41Around the door frame.
05:43However you want to call it.
05:45Don't forget to do the inside and the outside.
05:47Through here.
05:49If that's in the way go over here.
05:51Click this.
05:53Click here, here and here.
05:55Make sure each face is that way.
05:57It shouldn't face towards you.
05:59So just tilt it slightly.
06:01So you don't get the wrong spot.
06:03As I said if your face is towards you.
06:05You have to just turn it around.
06:07It's as simple as that.
06:09Click here, here and here.
06:11So you see at the moment.
06:13They are all facing the correct way.
06:15Because sometimes in Blender.
06:17You have to fix to these ones.
06:19Because that's the top.
06:21This just holds the shape.
06:23Of your model.
06:25That's what it's there for.
06:27Not that one, this one and this one.
06:29You see how these ones are facing towards me.
06:31That's exactly how it's supposed to do it.
06:33So drag it down a little bit.
06:35As I said we stopped.
06:37Now look.
06:39That's where we stopped.
06:41Now we can do the inside first.
06:43If you want to.
06:45Just to save confusing things.
06:47Otherwise we might get confused.
06:49So as I said just do this.
06:51All the way to the bottom.
06:53So once you get to the bottom.
06:55Do that.
06:57Fill the bottom in.
06:59As I said.
07:01This holds the shape.
07:03Of the actual pattern.
07:05That you're actually creating.
07:07As I said it was a door frame.
07:09Now it's going to be a building.
07:11It's not actually a building.
07:13What it is.
07:15It's like a concrete pillar.
07:17That holds up something in the game world.
07:19But I'm not going to tell you.
07:21What it holds up.
07:23So you do that.
07:25And of course if you do that.
07:27Around the actual box.
07:29The box turns out pretty well.
07:31So we can get rid of this box.
07:33I'm only waiting for you.
07:35To speed up the process.
07:37As I said I don't make big long videos.
07:39As I said all I've done.
07:41Was done all the edges for you.
07:43And now it looks like that.
07:45Now of course this could be loads of things.
07:47It could be a pillar.
07:49Like I said.
07:51A roadway.
07:53A building.
07:55It could be a lampshade.
07:57You can put it on the table.
07:59You can put it on the ceiling.
08:01You can put it in loads of places.
08:03Now of course.
08:05The reason why I'm talking about it.
08:07If you click on it.
08:09You can go over here.
08:11Scale.
08:13Kind of scale it down.
08:15Watch this.
08:17Scale it down to roughly.
08:19It will give you a different structure.
08:21Like that look.
08:23It's just a different shape in the game world.
08:25So when you're in that part of the world.
08:27You can have different kind of shapes.
08:29And patterns and whatever.
08:31You can make it a little longer.
08:33Of course you would do it better than that.
08:35As I said it's just a different pattern.
08:37A different shape.
08:39But maybe you make it a different kind of bridge.
08:41So anyway.
08:43Because it's all to do with this part of the world.
08:45Everything's got to match.
08:47Not really necessarily.
08:49But I want most things to match the world.
08:51So it all has some kind of meaning.
08:53In the game world.
08:55In that level.
08:57Now what do I want to do with it.
08:59What I want to do with it now.
09:01I want to add some glass in it.
09:03To add some glass in it.
09:05As I said I've already done it.
09:07So I'm going to show you how to do it.
09:09Zoom into the windows.
09:11Go here.
09:13Put the line in there.
09:15Click it. Let go.
09:17Go underneath that one.
09:19When you click the second one.
09:21Obviously that's made a mistake.
09:23Not me.
09:25But as I said.
09:27Zoom in.
09:29Go underneath that one.
09:31Click this one.
09:33Press F on the keyboard.
09:35The mirror will go in.
09:37It will go in back to front. That's perfect.
09:39Put the second one in.
09:41Press F on the keyboard.
09:43OK.
09:45It's back to front.
09:47Press F.
09:49Flip to normal.
09:51Show your face towards you.
09:53Put one in here.
09:55You can go here or you can go right in the corner.
09:57It doesn't matter.
09:59Whichever one you want.
10:01Put the middle one in.
10:03Leave it.
10:05Click that.
10:07Press F.
10:09It should face inwards.
10:11On this side.
10:13Press F.
10:15Go back to here.
10:17Flip the face over.
10:19Look at it.
10:21We've got a building with some windows in it.
10:23Great. You don't have that windows in it.
10:25These could be advertisement posts.
10:27Whatever you want to advertise on it.
10:29So I'm saying that's kind of how you
10:31are doing that one.
10:33Not bad.
10:35As I said I don't want to show you too much.
10:37I don't want to keep showing you videos.
10:39Obviously I want to show you
10:41how to go about doing it.
10:43All the windows in it.
10:45I think you can't agree.
10:47Where's the top?
10:49Ah.
10:51Where's the bottom?
10:53Click on.
10:55That's for later on.
10:57Because I can't reveal anything
10:59on top of here.
11:01I can't reveal anything at the bottom of here.
11:03And I definitely can't reveal
11:05what's actually inside here.
11:07So let me go here.
11:09I'll put a colour on it for you.
11:11That's how it looks.
11:13So as I said
11:15it's door number 4.
11:17That's all it is.
11:19It's just a door for number 4.
11:21Of course I've changed it into this.
11:23It could be a night lampshade.
11:25Anyway it's like a day and night cycle.
11:27That's what it is if you look at it.
11:29Anyway.
11:31That's what I'm using it for.
11:33So if you use it like this.
11:35These are two moons.
11:37If you want to look at it from that point of view.
11:39And then of course the cycle continues.
11:41As you can see.
11:43Like that.
11:45It continues and so forth.
11:47And then you've got the vampires, the werewolves
11:49and everything else that's actually in the world.
11:51That comes out
11:53either at night time or day time.
11:55It doesn't matter.
11:57But if you look at the geometry
11:59from a certain point of view
12:01you will see certain things
12:03actually in the geometry.
12:05Now the things that's in the geometry
12:07So what is it?
12:09Ah! Wait till you get to the game world
12:11and you might wish you never seen it.
12:13How about these?
12:15So is it anything?
12:17Oh yeah.
12:19This is a creature that lives
12:21right down in the basement.
12:23Not in the basement.
12:25But you're down farther than that.
12:27This one can see in the dark.
12:29Crystal clear.
12:31So yeah.
12:33You have to watch you don't bump into it.
12:35So anyway I'm going to tell you
12:37this one here and this one here
12:39look a pair of eyes.
12:41This is his kind of mouth, kind of beak
12:43kind of thingy look.
12:45Yeah anyway and this is kind of like
12:47his tail part.
12:49But anyway
12:51look at it, look at what it could be
12:53look at what it can be.
12:55Anyway you're going to meet it in the game world.
12:57So yeah.
12:59He's the protector of this.
13:01Just to let you know that.
13:03So
13:05the psycho cell
13:07has a creature all of it's very own.
13:09So yeah.
13:11You just want to hope you don't meet it realistically
13:13later on in the game.
13:15But anyway it's a bit more of a game.
13:17It's a game cycle thing.
13:19That's what it's for.
13:21If you want to put it in the game world
13:23and put it on the table and put a light inside it
13:25so you get the shadows off it.
13:27Of course you can do that.
13:29As I say you can always put it on the floor
13:31so the actual pattern
13:33that's actually on the lamp
13:35shines on the wall.
13:37As I said I've already showed you how to
13:39texture it, how to paint it. If you go in here
13:41what I want to do
13:43is go in here
13:45click on the box so I can make sure it's
13:47actually in the right one.
13:49This is the glass look and this is the box itself.
13:51So if you open the box
13:53make sure it's in the life cycles.
13:55If you go to the box itself
13:57I'm going to show you how to
13:59change the colour and texture of it.
14:01Here the colour looks great.
14:03It's not a grey kind of black.
14:05It's whatever kind of colour
14:07you want to call it. It depends on the TV screen.
14:09So of course look here
14:11and now of course you can pick any colour
14:13of the rainbow. If you push this up
14:15it will go lighter like this look.
14:17And then you can try and change
14:19whatever colour that you want.
14:21As I said
14:23or you can press the eyedropper
14:25pick any colour you want from anywhere
14:27inside the screen.
14:29Inside Blender screen.
14:31So you can go here, here, here. It doesn't matter where you go.
14:33So we can have a nice blue.
14:35But I think here I don't want that blue.
14:37Can I have this blue?
14:39Yeah, but I don't want it blue
14:41because the world is black, blue
14:43and white.
14:45So this has got to go back to black.
14:47So leave that like that.
14:49Go down to the glass.
14:51I'll show you the glass.
14:53Go to the glass bar.
14:55Now if we zoom in to the glass a little bit
14:57as I said we can't quite see
14:59so let's have a look.
15:01What you want to do is put a shield on it.
15:03Scroll down and see this one here.
15:05Click this.
15:07Go to this one.
15:09If you want to change the colours here.
15:11If you want to change the hues.
15:13This is the RGB colour if you want to change that.
15:15All we are interested in here is the glass bar.
15:17So we click it.
15:19We click the alpha.
15:21We change 1 to 0.
15:23And 0.
15:251, 2, 3.
15:27Click off it.
15:29It goes half transparent.
15:31Look.
15:33If you want to change the colour of the glass
15:35like green, brown, blue, whatever.
15:37Just move the colour and it will change the colour
15:39back to whatever colour you want.
15:41It comes to the bottom.
15:43Go here. View.
15:45Turn the roughness completely off.
15:47Go here. Alpha.
15:49Again, you can change the colour here.
15:51Click it.
15:531 to 0.
15:55And 0 to 1, 2, 3.
15:57If I click off it, it should change the glass.
15:59That's what it's supposed to do with the glass.
16:01I'll show you in a minute.
16:03Once it does that,
16:05because we want to be able to see the glass.
16:07If you click into normal mode,
16:09you should be able to see the actual
16:11transparency of the glass.
16:13Of course, you can't see.
16:15Sometimes Blender works great,
16:17and sometimes it kind of messes me around.
16:19You can't see inside it.
16:21Come on, where is it?
16:23Make sure this is off.
16:25And I know it's only half.
16:27This one.
16:29That's it. It's not working at all.
16:31Come on, where is it?
16:33Anyway, it is glass.
16:35It should work.
16:37There should be no reason why it shouldn't work.
16:39As I say, if you watch my videos,
16:41sometimes you'll see that it does work,
16:43and sometimes it actually doesn't.
16:45Let me change that into Cycles.
16:47If you click on Cycles,
16:49you can actually look through the glass.
16:51Now, of course, once it's glass,
16:53it looks different, and depending on
16:55the lighting in the game world,
16:57it will also look different again.
16:59So, as I said, that's what it's for.
17:01As I said, there's a piece of glass in here.
17:03As I said, it all depends on whether it's on
17:05EV. If it's on EV, it looks like that.
17:07Not always. Sometimes it looks
17:09actually like that in EV.
17:11But that's how you look in Cycles.
17:13And then you can go to this one.
17:15This is Cycles.
17:17Cycles means, basically, just keep rendering
17:19and rendering and rendering. You don't want
17:21to do that.
17:23It's no good for the graphics card.
17:25It will look different,
17:27depending on the lighting, depending on
17:29how you set it up.
17:31I'm going to put mine back into EV.
17:33As I said, I'm going to go to Normal Mode.
17:35Even in Normal Mode, this is supposed to be
17:37black.
17:39And the window is supposed to be see-through.
17:41What I'm going to do here,
17:43for my convenience,
17:45I'm going to take the whole thing
17:47and put it here.
17:49I'm going to export it for a moment.
17:51I just want to see if it's working.
17:53I'm going to go here.
17:55Just give me a second.
17:57Tick this one.
17:59Tick all the first ones.
18:01Skip that. Skip that. Go here.
18:03Go here. Go here.
18:05Go here.
18:07Just delete it for a second.
18:09Now, of course, when I import it,
18:11sometimes it will keep the transparency.
18:13Sometimes it won't.
18:15Normally, the Color Ladder
18:17keeps the transparency.
18:19Now, you see how it didn't keep the color look?
18:21It didn't keep nothing.
18:23It didn't keep no color, but only one look of it.
18:25Oh, it did.
18:27So, let's go back in here.
18:29Turn on Material.
18:31Now, of course,
18:33did it keep the transparency?
18:35Yes, it did keep transparency.
18:37So, the transparency is on it.
18:39Of course, to see the transparency,
18:41I have to go into Cycles.
18:43And turn on this one.
18:45And I should be able to see
18:47the transparency.
18:49No, it's not working.
18:51It's not.
18:53If that's the case, open it up.
18:55Take a look at it.
18:57Did you keep the transparency?
18:59No, you never.
19:01Put the shield on it. Maybe I forgot.
19:03Click here.
19:05Change 1 to 0.
19:07Change this to 1, 2, 3.
19:09Now, if you watch the glass,
19:11you can't put it in normal mode now.
19:13I'm not in EV. I'm in standard mode.
19:15Go to the bottom.
19:17Turn Roughness off.
19:19Now, when I change it this time,
19:21it will
19:23definitely change to
19:25transparency.
19:27Go here. Go 1, 2, 3.
19:29Watch the glass.
19:31See how the glass works?
19:33That's because once you export it
19:35and bring it back in, it just seems to work better.
19:37Now, look, I'm not
19:39actually in that mode.
19:41I'm in this mode, which you can't
19:43create. That's perfect for me.
19:45That's how it's supposed to be.
19:47This is how you export it.
19:49When you export it as a collider, whatever you want,
19:51and bring it back in, if you do save,
19:53let's go back here,
19:55if you export it as a collider,
19:57it does save the glass.
19:59I'm not too sure if it saves the glass.
20:01I don't actually use it, so I don't like it.
20:03The 3ds files,
20:05they do keep the transparency.
20:07They do. So, when you export it,
20:09it just keeps the glass. It just keeps everything
20:11concrete. But, again, I don't use
20:13that file. I just don't use it.
20:15So, anyway, this is
20:17the DAW. If you want it,
20:19this is DAW number 4.
20:21And it's called
20:23the FreeMoonCycleCell.
20:25That's what it's called. So, if you're looking for it,
20:27go on the internet and download it.
20:29I've turned the colour off for you.
20:31So, you can see like this.
20:33Now, before we disappear, let me just tell you this.
20:35Go to here.
20:37Do you remember when I told you about
20:39the edges of the door frame?
20:41If you look under the actual door frame,
20:43you can pull out
20:45the actual lip.
20:47So, let's say you go here.
20:49I'm only going to do
20:51roughly, so it's not going to look too great.
20:53But I want to show you the idea.
20:55So, go here. Grab all
20:57of the edges.
20:59Grab all these.
21:01Grab all the edges to hold it all up.
21:05Go to the top view.
21:07Make sure it's in top view. Go to
21:09extrude. Go to
21:11the top. Go to here.
21:13You don't have to do it. You can do it in the side view.
21:15But I'm showing you from the top view. Pull it out once.
21:17You've got a bit of a lip around it.
21:19And then, of course,
21:21if you... I've lost my mouse for a second.
21:23Pull it down.
21:25Of course, now we've got like a little bit of a lip
21:27around that building.
21:29Of course, if you do that with a whole lot,
21:31it's going to look half great.
21:33Of course, if you want me to show you
21:35how to do it, I will show you.
21:37That's all you do. So, you do exactly what I
21:39just showed you, except select
21:41everything around it.
21:43And then just pull it out once,
21:45maybe twice. Well, it's up to you.
21:47As I say, if you go to the top mode,
21:49go back to here.
21:51Best pull it and pull it back out.
21:53But I don't want to do that.
21:55So, undo. Go to extrude.
21:57If I want to pull it out,
21:59I pull it all out at the same time.
22:01So, I'm going to go one, two.
22:03So, it's got like a
22:05quite big ledge on it.
22:07Now, if I pull the same two,
22:09I only want to pull
22:11the same one.
22:13So, what I would tell you to do,
22:15honestly, is
22:17if we undo this part,
22:19just for one second.
22:21Let's say we take all this
22:23window. Pull it all out
22:25once. I'll show you.
22:27Hold your variety. That's not a keyboard.
22:29Not that one. Click this one.
22:31So, we click the window ledge here, around the
22:33window ledge.
22:35Click this window ledge.
22:37So, we click the whole window ledge
22:39and this part at the
22:41bottom. Go back to the top view.
22:43Do it.
22:45Pull it out once.
22:47Like that.
22:49So, it looks like that.
22:51Go back and have a look.
22:53Make sure you're happy with it.
22:55Look at it first.
22:57Now, don't forget this is the window ledge.
22:59Not the balcony.
23:01Now, what you want to do,
23:03go here and pull the border
23:05on its own.
23:07So, the border itself is a little bit wider.
23:09So, just pull that out.
23:11Put it on an angle
23:13so you get the corner shape of the building.
23:15Now, of course, if you just leave it like that.
23:17Of course, now we've got a bit more
23:19geometry going on with the model.
23:21Now, of course, if you do that
23:23then you kind of bevel the edges.
23:25If you want to do that, it will look better.
23:27But, obviously, the more
23:29geometry you add to your thing
23:31the more shadow it's going to cast.
23:33The more better it's going to look, really.
23:35But, of course, you don't want to.
23:37You don't have to put that on there.
23:39You can have it looking just like that.
23:41Just looking like that.
23:43So, let's go back into this mode.
23:45You've got the colour back on it.
23:47Notice how it looks. Now, because it's dark, it looks different.
23:49You see how it's flat?
23:51If you turn it around, look.
23:53Now we've got a bit of a shape on it.
23:55Of course, don't forget, if there's a light in the room
23:57we're going to get the
23:59we're going to cast the shadows off that
24:01all over the place.
24:03So, it's up to you. If you want to pull it out
24:05you can. And then, of course,
24:07if you want to basically go into, like, normal mode
24:09click the box
24:11right click and then just go smooth.
24:13You can smooth it, but
24:15when you smooth it
24:17there's not much geometry to it, so it doesn't look
24:19quite too great.
24:21But it's up to you if you want to smooth it.
24:23I don't smooth my objects. I really don't.
24:25And if I want it smooth,
24:27I make it smooth.
24:29So, that's what I do.
24:31Wherever I need a lot of geometry,
24:33let's say a corner, if I wanted a nice
24:35round corner on that
24:37I would have made it round to start with.
24:39But it's not a round corner.
24:41It's a flat corner.
24:43I want to keep it flat. I want it actually perfectly flat.
24:45So, anyway,
24:47this is the video if you want it. So, if you want
24:49to download, as I said, it's part
24:51of the level for door number 4.
24:53So, if you want it,
24:55click it, download it and
24:57happy modifying.
24:59So, if you want to modify it, as I said, go ahead and modify it.
25:01I'm just showing you how it looks
25:03with glass and
25:05with colour. So, this is actually the colour
25:07of the thing.
25:09And inside here, as I said, it could be a lift
25:11and
25:13it could be a chamber for the creature.
25:15It doesn't matter what's in there.
25:17You'll find out what's in there later.
25:19Anyway, as usual, thanks very much.
25:21See you soon.
25:23Bye now.