Watch our videos on this channel to learn the most advanced and skillful ways of diagnosing and repairing many types of Printed Circuit Boards (PCB). We use many types of advance tools to troubleshoot and fixing the problem. We also provide videos on Industrial, Commercial & Domestic Refrigeration Systems and Air Conditioning. Please Subscribe to our channel to stay updated and to keep learning. Thank you for Visiting our channel. Please don't forget to Subscribe, Share and like :) if you have any questions, please feel free to contact on +92 333 8921850
#code repair # inverter ac PCB course #review for ac repairing course #ACPCBrepairingcourse #AC PCB training institute #ACPCBrepairing #ac PCB repairing course in Pakistan #ac PCB repair #Repair ac #PCB #repair ac PCB repairing #BestACPCB repairing #ACrepairing course# best ac PCB repairing # inverter ac PCB repair and voltage study # ac PCB board repair # How to repair inverter ac PCB board # ac PCB repair Kaise kara# inverter ac PCB online course # inverter ac PCB repairing institute # inverter ac indoor PCB wiring # Haier washing machine PCB repair # online inverter repairing course# circuit repair training # inverter operation in power electronics #Basic electronics channel #inverter fridge PCB repair #washingmachinePCBrepaircourse# inverter circuit board #ac repairing training center #AC Godraj inverter AC #Ustad #Babar #BabarPCB #Babarelectronics #Haier inverter ac New model inverter PCB#DC inverter Haier outdoor PCB #Haier inverter ac old model inverter PCB# Haier indoor PCB # E1# E2# E3# E4# E5# E6# E7# E8# E9# EE# EH# F1# F2# F3# F4# F5# F6 #F7 #F8 #F9 #FO #FU #PO #P1 #P4 #P7#PH #H5 #OB #U8 #EE #EH #F1 #F21 #F24 #F25 #F28 #H5 #Samsung #E121 #E122 #E468 #E485 #Panasonicerror #H15 #H27 #H30 #Dawlance #C4 #mamunkanjan #electronics #inverter Washing machine PCB repair #Washing machine PCB Diagram #Gree Dc Dawlance PEL Orient Dc inverter ac P4 error code outdoor pcb Dc inverter ac PCB PEL #Dawlance Orient Kenwood #Changhong PEL Orient# Dawlance Kenwood Haier Dc inverter ac E7 error code outdoor pcb TCL DC inverter ac EE P4 P6 P8 error code Gree Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Changhong Ruba Dc inverter ac E5 error code VRF PCB repairing center Babar ElectronicsDawlance Dc inverter ac F1 error code outdoor pcb Dc inverter ac error code repair Sir BabarChanghong Ruba Dc inverter ac J5 error code Electrolux Dc inverter ac J5 error code outdoor pcb Dawlance Dc inverter ac P4 error code outdoor pcb Dc inverter ac service center sir Babar Kenwood Dc inverter ac FO error code outdoor pcb inverter ac pcb teacher Sir BabarHaier Dc inverter ac 1 ton /1.5 ton /2 ton PCB connection VRV / VRF PCB repairing center Sir BabarHaier Dc inverter ac compressor off in one minute No error IPM kya hai IPM Testing Sir Babar Gree DC inverter ac outdoor pcb E8 error code and indoor pcb Orient Dc inverter ac outdoor pcb P4 error
#code repair # inverter ac PCB course #review for ac repairing course #ACPCBrepairingcourse #AC PCB training institute #ACPCBrepairing #ac PCB repairing course in Pakistan #ac PCB repair #Repair ac #PCB #repair ac PCB repairing #BestACPCB repairing #ACrepairing course# best ac PCB repairing # inverter ac PCB repair and voltage study # ac PCB board repair # How to repair inverter ac PCB board # ac PCB repair Kaise kara# inverter ac PCB online course # inverter ac PCB repairing institute # inverter ac indoor PCB wiring # Haier washing machine PCB repair # online inverter repairing course# circuit repair training # inverter operation in power electronics #Basic electronics channel #inverter fridge PCB repair #washingmachinePCBrepaircourse# inverter circuit board #ac repairing training center #AC Godraj inverter AC #Ustad #Babar #BabarPCB #Babarelectronics #Haier inverter ac New model inverter PCB#DC inverter Haier outdoor PCB #Haier inverter ac old model inverter PCB# Haier indoor PCB # E1# E2# E3# E4# E5# E6# E7# E8# E9# EE# EH# F1# F2# F3# F4# F5# F6 #F7 #F8 #F9 #FO #FU #PO #P1 #P4 #P7#PH #H5 #OB #U8 #EE #EH #F1 #F21 #F24 #F25 #F28 #H5 #Samsung #E121 #E122 #E468 #E485 #Panasonicerror #H15 #H27 #H30 #Dawlance #C4 #mamunkanjan #electronics #inverter Washing machine PCB repair #Washing machine PCB Diagram #Gree Dc Dawlance PEL Orient Dc inverter ac P4 error code outdoor pcb Dc inverter ac PCB PEL #Dawlance Orient Kenwood #Changhong PEL Orient# Dawlance Kenwood Haier Dc inverter ac E7 error code outdoor pcb TCL DC inverter ac EE P4 P6 P8 error code Gree Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Gree Dc inverter ac E6 error code outdoor pcb Dc Changhong Ruba Dc inverter ac E5 error code VRF PCB repairing center Babar ElectronicsDawlance Dc inverter ac F1 error code outdoor pcb Dc inverter ac error code repair Sir BabarChanghong Ruba Dc inverter ac J5 error code Electrolux Dc inverter ac J5 error code outdoor pcb Dawlance Dc inverter ac P4 error code outdoor pcb Dc inverter ac service center sir Babar Kenwood Dc inverter ac FO error code outdoor pcb inverter ac pcb teacher Sir BabarHaier Dc inverter ac 1 ton /1.5 ton /2 ton PCB connection VRV / VRF PCB repairing center Sir BabarHaier Dc inverter ac compressor off in one minute No error IPM kya hai IPM Testing Sir Babar Gree DC inverter ac outdoor pcb E8 error code and indoor pcb Orient Dc inverter ac outdoor pcb P4 error
Category
🤖
TechTranscript
00:00Assalamualaikum, this is Daikon kit.
00:04The problem with this is that the compressor starts and stops after a short time.
00:11This kit is for repairing.
00:13When we tested it, we found that this reactor is not working properly.
00:22This is the remote of Daikon.
00:25This is the kit.
00:27This is the special meter.
00:32This is the model number of the meter.
00:34We checked it with this.
00:36The normal meter will not tell if it is working properly or not.
00:39When we checked it, it was not working properly.
00:42Now I will remove it.
00:44I am going to do the desoldering with this.
00:48When I will do the desoldering, I will remove the reactor.
00:56I have one more kit with me.
00:59I will remove it from the other one.
01:13All the rods have been desoldered.
01:15It will come out easily.
01:23See, it came out.
01:26This is broken.
01:28I have another big one with me.
01:32This is broken.
01:34Now I will do the desoldering with this.
01:39See this.
01:42Now I will do the desoldering.
01:46Let's see.
01:55Let's see.
02:02Let me show it to you.
02:04Let's check it.
02:06Genuinely, it has a bad view.
02:08There is no judgment at all.
02:10It has been desoldered.
02:12It has been desoldered.
02:14Now we have installed it.
02:16Now I will see it by running it.
02:18I will communicate with the compressor.
02:20This is the old one which was broken.
02:22There is a video on my channel.
02:25How the reactor is tested.
02:27How it is checked.
02:29It has to be checked with an ordinary meter.
02:31If you take this meter,
02:33it will be checked with this meter only.
02:35If you check it with an ordinary meter,
02:36it will give you a buzzer.
02:37But you won't know if it is good or bad.
02:39That's why I am showing you the model number of this meter.
02:42So that you can take this meter and check it.
02:45If you want to check any reactor,
02:47if you want to check the connector,
02:48if you want to check the choke,
02:49if you want to check anything,
02:51you can check it with this meter.
02:53Now we have completely communicated with it.
02:56When the compressor started running,
02:58it tripped at the same time.
03:00Let's see if there is any short in it.
03:02Let's check it now.
03:04Let's see.
03:06Let's check it now.
03:08If there was a short in it,
03:10it wouldn't have turned on.
03:12I will put the meter in buzzer mode.
03:14I have started checking it.
03:16This is fine.
03:18The diode must be fine.
03:20There is no problem in it.
03:22It is coming because of the capacitor.
03:24Let's check its IPM.
03:26Let's put it here.
03:28As I have already made a video.
03:30It is on your channel.
03:32You can watch it.
03:34Let's check its low side.
03:36Let's see if there is any problem in it.
03:38There is no short in it.
03:40Okay.
03:42Now it has IGBT.
03:44It has 40 and 60.
03:46This is also a short.
03:48And this is also a short.
03:50It is possible that
03:52one of them is a short
03:54and the other is fine.
03:56But I can't find it out.
03:58I can check it by removing it.
04:00But it is possible that
04:02we should not remove it.
04:04I can check it by cutting its leg.
04:06It can be one or both.
04:08But one is more likely
04:10to be a short.
04:12I have cut one of it.
04:14I have cut one of it.
04:16Now I will check
04:18if there is any short in it.
04:22There is a short.
04:24But I will check it.
04:26That's why I have separated it.
04:28Just because of you.
04:30Because the video will be long
04:32if I remove it.
04:36This is fine.
04:38And this is a short.
04:40Okay.
04:42This is fine.
04:44And this is a short.
04:46But until we check it,
04:48it is not burnt.
04:50Now I have put it on a davenport.
04:52When I put it,
04:54I will check it like this.
04:56It is fine.
04:58This is fine.
05:00But this is a full short.
05:02This is a short.
05:04Now we will join it
05:06like this.
05:08But I will remove it.
05:10But I will remove it.
05:12Then I will remove the leg
05:14and put it again.
05:16See this.
05:18It is out.
05:20It is out.
05:22Now see this.
05:24There is no short in it.
05:26See this.
05:28This is an SMD.
05:30You have to check its number.
05:32Sometimes when there is
05:34a problem like this,
05:36it can be a short.
05:38We have to check it.
05:42See this.
05:44This is also a short.
05:48Okay.
05:50This is used as a fuse.
05:52But it is fine.
05:54Now I will put this.
05:56And I will put this new.
05:58Now with the help of a sucker,
06:00we will remove it.
06:02After removing,
06:04this is the one.
06:06This is also burnt.
06:08This is also burnt.
06:10Now I will remove it.
06:12Now see this.
06:14I have removed the IGBT.
06:16This is right.
06:18This is also fine.
06:20First I will leave it because of both.
06:22Now see this.
06:24The method of this is
06:26that you have to put it
06:28like this always.
06:30And whenever you have to put
06:32something like heat sink,
06:34you should never do this.
06:36You can do it.
06:38You can put a lever here.
06:40If you put a lever here like this,
06:42you can cut it.
06:44You can put everything.
06:46But still,
06:48there can be a problem.
06:50There can be a problem.
06:52There can be a problem.
06:54So I will do it first.
06:56See this.
06:58Now I will show you
07:00how to do soldering.
07:02See this.
07:04If I leave it like this,
07:06it will fall.
07:08I will temporarily bend
07:10its leg a little.
07:12So that it does not fall down.
07:14So I will put it
07:16in its place here.
07:20See this.
07:22Now I am putting
07:24its screw
07:26so that it sits
07:28in its alignment and base.
07:30Because
07:32everything else is on its own line.
07:34So to make it better,
07:36you can put
07:38the component next to it.
07:40So that there is no
07:42difference in alignment.
07:44See this.
07:46I have put it here.
07:48Now I will do soldering
07:50with the help of soldering iron.
07:52I will show you how to do soldering.
07:54After soldering,
07:56I will do all the work.
07:58I will do all the work.
08:00Then we will try it.
08:02Because it was a shard,
08:04it was not supposed to work like this.
08:06I will solder all three.
08:08These three will be soldered.
08:10Now see this.
08:12Check it.
08:14The main thing to see is
08:16that no one can judge
08:18that any work has been done
08:20again or it is genuine.
08:22Okay.
08:24We have put this.
08:26Now we will open it.
08:28After opening, I will give it
08:30one more current.
08:32You can also give it like this.
08:34No issue.
08:36No problem.
08:38But let's open it.
08:40Because I don't know
08:42if the base is good or not.
08:44So that we can check it.
08:46It is better to open it.
08:48Let's run it like this
08:50once.
08:52So that our time is saved.
08:54I will put all the screws.
08:56I will put all of them.
09:00The main thing
09:02of this is that
09:04any fault or any kit
09:06its main thing is to trace.
09:08That is important.
09:10Everything happens.
09:12The kit will also be repaired.
09:14But you just don't do this.
09:16So many people watch the video.
09:18If you like it,
09:20this time do it.
09:22No one will work
09:24and show you.
09:26No one will do like this.
09:28Look at this.
09:30It has a screw.
09:32Now we will do
09:34the whole story of this kit.
09:36Today I will also tell you
09:38that what is the whole story
09:40of this kit.
09:42You have to watch this video till the end.
09:44One story is very good.
09:46These three kits came to us
09:48for four rupees.
09:50Today I will tell you and show you.
09:52You have seen this kit.
09:54I have repaired it in front of you.
09:56This kit came from many places.
09:58From many places.
10:00But thanks to Allah that we have
10:02repaired it.
10:04Now the kit will work.
10:06And it will work 100%.
10:08It is a sure shot.
10:12We have put it.
10:14Despite this, there is a little
10:16serious light.
10:18There is a problem.
10:20Now I will check
10:22if there is anything wrong.
10:24This is also fine.
10:28This is also fine.
10:30And this is also bad.
10:34Now I will change the polarity
10:36and check it.
10:40Now we will check it like this.
10:42Let's check it like this.
10:44Like this.
10:46Like this.
10:48One of its rectifier
10:50is burnt.
10:52Now we will remove it.
10:54Now this is the problem.
10:56As you have seen in the video.
10:58I have done LGBT testing.
11:00And along with it, I have done
11:02HIV testing.
11:04Now I will remove it and show you.
11:08Now we have removed it completely.
11:10We have removed the LGBT change.
11:12We have removed the reactor change.
11:14Now I am turning it on.
11:16See, I am turning it on.
11:18It is on with the remote.
11:20Now I will turn on the compressor
11:22and show you completely.
11:24And it has a little work.
11:26I will tell you that too.
11:28Because this kit was sent to be repaired.
11:30This kit was sent to be repaired.
11:32This was sent to the dealer.
11:34The dealer,
11:36his mechanic,
11:38this is the same box.
11:40There were four kits in it.
11:42Because this one was dead from there.
11:44And these four
11:46are complete.
11:48Now as soon as the kit is on,
11:50I will show you.
11:52The kit has been repaired.
11:56Our compressor is on.
11:58See.
12:00This compressor is on.
12:02This kit is complete.
12:04We have repaired it.
12:06The kit is ok.
12:08Now we will do it with the remote.
12:10See, it is open.
12:12We will not run it for long.
12:14If you like our video,
12:16if you like our work,
12:18then subscribe to our channel
12:20and like and share the video.