బ్యారేజ్లో చిక్కుకున్న బోట్లు ముక్కలవ్వాల్సిందే
Boat Cutting Process Started in Prakasam Barrage : ప్రకాశం బ్యారేజ్ వద్ద విధ్వంసం సృష్టించి అక్కడే చిక్కుపడిన పడవుల తొలగింపు ప్రక్రియ ముమ్మరంగా కొనసాగుతోంది. గేట్ల వద్ద చిక్కుకున్న భారీ పడవలను క్రేన్లతో ఎత్తి తీయడం సాధ్యపడక పోవడంతో ముక్కలు చేయాలని అధికారుల నిర్ణయించారు.
Category
🗞
NewsTranscript
00:00We are the diving team. Now we are inspecting the boat.
00:05We are inspecting the boat to see how many cuts will be made to the gate.
00:11The underwater cutting is done by using the arc cutting rod.
00:16The boat is cut into two pieces and then pulled by the salvage party.
00:22As far as I know, it took three days for the recovery of four boats.
00:26Till now, we have brought the underwater cutting equipment for the Puluchandal project.
00:32Here also, the underwater cutting is done and the boat is cut into two pieces and then pulled by the salvage party.
00:37Underwater cutting is an imported equipment.
00:39We have been using this equipment for the past 23 years.
00:43The boat is 12 feet deep.
00:45Our boat is 12 feet or 20 meters deep.
00:49Now, our divers have gone to check the possibility of cutting the boat.
00:55Our divers will come up in an hour.
00:59Once the divers come down, they work for one and a half hour to two hours.
01:03Then, two more divers will come.
01:05One diver will cut the boat.
01:07The other diver will help the cutting divers to supply the welding rods.
01:12In this way, two divers will work for one and a half hours.
01:15Then, two divers will work for one and a half hours.
01:19As far as I know, the underwater cutting process will start between 5 pm and 6 pm.
01:27As per my experience, one boat can be cut into two pieces in the evening.
01:32Everything is possible.
01:34The water flood is also applying a little force.
01:36According to my opinion, it is possible to cut the boat into two pieces today.
01:43How do you bring the cut boats out of the water?
01:50We use balloon technology.
01:52We put the balloons in the water and lift them up.
01:55A rope part and a salvage part are used to pull the boat out of the water.
02:00Where do you get the balloons from?
02:02We have balloons from Vishakhapatnam.
02:04We use balloon technology.
02:06We use balloon technology after the cutting process.
02:13For more information, visit www.ISGlobal.org