band TV kit ko chalu karen chutki mein

Khempur Repair

title  band TV kit ko chalu karen chutki mein   About  doston khempur repair channel Mein aapka swagat hai Aaj maine aapke liye ek TV ko repair kara Hai Doston yah TV mere pass repairing ke liye aaya hai aur is TV mein problem yah hai ki yah Puri tarike se ded hai aur jab Ham isko series per Laga rahe hain to series ka bulb gilo ho raha hai iska matlab doston is TV ki power supply mein problem hai Color TV ki power supply ko kaise theek karte hain kya problem Hoti Hai yah sab maine aapko is video mein bataya hai isliye aap is video ko pura Dekhen video Pasand Aaye To like Karen share Karen aur comment Karke bataen aapko yah video kaisa laga thank u   Instagram  https://www.instagram.com/khempurrepair/   playlist  Colour TV https://dailymotion.com/playlist/x7jb2n   #khempurrepair  #tv  #tvrepair  #tvrepairing

Transcript

00:00Friends, Welcome to Khempur Repair Channel.

00:04Friends, this TV is here for repair.

00:07When I am putting it on series,

00:09the bulb of series is glowing.

00:11You can see.

00:12If this problem is in your TV,

00:14that bulb is glowing or TV is faulting,

00:17then you watch this video.

00:19This video is very useful for you.

00:21Friends, whenever there is a problem in TV,

00:25then you keep in mind that

00:27in this TV or any TV,

00:29this black strip,

00:31the part on the left side

00:34is the primary section

00:37and the part on the other side

00:39is the secondary section.

00:41In this primary section,

00:43there are diodes, line filter

00:46and DC supply is made from diode

00:49which comes on capacitor

00:51and this supply goes ahead from capacitor.

00:54This is how this primary section works.

00:58If this is the problem in your TV,

01:01then you have to check this first.

01:04You have to check from the beginning.

01:06First, check the voltage on the man lead.

01:08After man lead, check on the line filter.

01:11After that, check on the diode

01:14whether you are getting volt in the output or not.

01:17I have also put a cut in the print.

01:19Volt is coming on the diode.

01:22DC Volt

01:24If DC Volt is coming,

01:26then you have to check

01:28what is the problem in front of it.

01:30The chances of capacitor getting damaged are very less.

01:33In front of it, whatever supply

01:35there is a view,

01:38there can be a problem.

01:40Either it gets heat or short.

01:43If I talk about this kit,

01:45there is 1802 in it.

01:48First, I will show you this view.

01:51Sometimes it gets short.

01:54Because of this, there is a problem in the supply.

01:57I will show you on continuity.

02:00There is no problem in this.

02:03But there is a problem in the view.

02:06We will remove this.

02:09We will remove it and check it on continuity

02:12whether it is right or wrong.

02:14By looking at it, it seems that

02:17its view has been damaged.

02:20If the view of your TV is damaged,

02:23then you can change it.

02:25There are different numbers of views in the supply.

02:27There is also STR.

02:29It is not necessary that your TV will have a view.

02:315 pin STR can also be there.

02:33This view is short.

02:35You can see here that it is short.

02:37We will put another one in its place.

02:40Its number is 1802.

02:42We will put the other one of the same number.

02:45OK

02:47I have soldered it here.

02:50I will show you its output volt.

02:53I will show you its output volt.

02:56The series bulb is not lit.

02:59It is on the board.

03:01We will check the DC volt of the output.

03:04There are 110 volts here.

03:07There are 7840 volts here.

03:10There are 12 to 16 volts in the audio section.

03:13There are 12 to 16 volts in the audio section.

03:16You can see that the TV is working properly.

03:19You can repair the TV in this way.

Category

Transcript

Recommended