Water pump ki repairing
Water pump ki repairing
Transcript
00:00Hello Assalam-o-Alaikum, I am Muhammad Shahab from M-Shahab TV, today we will show you how
00:15to repair a dunky motor.
00:17This is a dunky motor that we have been using for almost a year and it was not serviced.
00:25Now the oil seal has leaked.
00:28Because of this, when we put oil in it, the oil starts coming out from here.
00:35Now we will open the nut from here.
00:40With this, the shock will come out.
00:44It will have a 16mm nut.
00:47You must have a tool box with you.
00:50Otherwise, it is necessary to have a 12mm, 13mm, and 16mm fix.
00:59We will turn this shaft counterclockwise and take it out.
01:04Then we will remove the oil seal and replace it with a new seal.
01:11Let's see how we will repair it.
01:16We will turn the shaft counterclockwise with this 16mm nut.
01:27With this, the shaft will be unscrewed and pulled out by hand.
01:38Now we have taken it out by hand.
01:45Because it has not been repaired for a year.
01:49It was running continuously.
01:51You can see that the bolts have worn out.
01:54The bolts of the shaft have worn out.
01:56Because of this, there was a problem of sucking and pumping.
02:01Because there was no pressure.
02:04Because of this, it took a lot of time to fill the tank.
02:08It took about 2 to 4 hours to fill the tank.
02:13Now we have taken it out.
02:16You can see that the bolts of the shaft have worn out.
02:21We will also replace it.
02:23We will also show you how to open the nut.
02:34This is the oil seal from which the oil was coming out.
02:40It is completely damaged.
02:43We will take it out by holding it with a screwdriver.
02:50Because by doing it by hand, the nut is breaking.
02:53We will put it inside by holding it with a screwdriver.
02:58We will push it out from one side.
03:02By doing this, the oil seal will come out.
03:04Similarly, we will apply oil to the other oil seal.
03:10The way to remove the bogie is that you must have a grip plier.
03:17With the help of a grip plier, you can hold it from one side.
03:24Then turn it anticlockwise with the help of a number 16 wrench.
03:34Then remove the bogie from the shaft.
03:39You can see that I have turned it anticlockwise.
03:47Because of this, the bogie has started coming out.
03:52You can see that the bogie has started coming out.
03:56Because of continuous use of water, the bogie starts making noise.
04:04It is necessary to have a good spanner.
04:09Otherwise, there is a risk of the bogie breaking.
04:12You can see that the bogie is completely damaged.
04:19One side of the bogie is also damaged.
04:24Because of this, the pressure of the bogie has reduced by 50%.
04:32Similarly, we will apply nut to both sides of the bogie.
04:36With the help of a grip plier, you can hold it from one side.
04:42Then turn it anticlockwise with the help of a number 16 wrench.
04:46Then remove the bogie from the shaft.
04:53The bogie is completely damaged.
04:56You can see that the bogie is completely damaged.
05:02Because of continuous use of water, the bogie has not been repaired.
05:07However, it is necessary to change the bogie within 5 to 6 months.
05:15So that the performance of the pump is good.
05:22If we had called a mechanic to repair the bogie, he would have charged Rs. 700 to Rs. 1000.
05:27So we decided to make a vlog and show it to you.
05:31We got this new bogie for Rs. 60.
05:36This is its water seal or oil seal.
05:40We got it for Rs. 20.
05:46Now we will install it.
05:50It is not difficult.
05:53You can easily replace it.
05:57If you have all the necessary tools, you can easily replace it within half an hour.
06:06It is a very easy way.
06:08You should know about it.
06:15We will put the bogie in hot water and make it soft.
06:20Then we will install it.
06:25We have installed the bogie.
06:29Now we will tighten it clockwise.
06:33So that the bogie does not come out while moving.
06:41After installing the seal, we have installed the bogie again.
06:46It is also called water seal.
06:48It is also called water seal because the water does not go into the oil in the reverse.
06:55It is also called oil seal because the oil does not come out.
06:59You can call it by any name.
07:09Tighten it clockwise.
07:13We have installed the bogie.
07:19You can see the soft bogie.
07:22We have fixed it.
07:25We have installed it.
07:26Now we will tighten it clockwise.
07:48We have installed the bogie.
08:07Do not skip this video.
08:10Watch it from beginning to end.
08:13So that you understand everything clearly.
08:16Like, share and subscribe.
08:21So that you get the notification of the next video.
08:27And we make good videos for you.
08:30In the next video, we will show you how to replace the cable of the speedometer of 125.
08:42Before that, we have shown you the video of goats in the goat market.
08:46How the goats look like.
08:50We have replaced it.
08:56You can see how much water is coming out of the pressure.
09:00Its performance has increased by 100%.
09:04Now the oil is not coming out of it.
09:12The pump is working very well.
09:34The performance of the pump is very good.
09:38Because we have not installed the bogie.
09:41And we have changed the oil seal.
09:44You can see how much water pressure is coming out of it.
10:03Thank you for watching.