To perform a netinstall of the MikroTik SXT SQ 5 device, follow these steps:
1. Prepare your Netinstall tool: Download the latest version of the Netinstall tool from the official MikroTik website and install it on your computer. Ensure that your computer and the SXT SQ 5 device are connected to the same network.
2. Connect your SXT SQ 5 device: Connect your SXT SQ 5 to your computer using an Ethernet cable. Make sure the SXT SQ 5 device is powered on.
3. Open Netinstall: Launch the Netinstall tool on your computer.
4. Select the SXT SQ 5 device: In the Netinstall tool, you should see a list of available devices on your network. Select the SXT SQ 5 device from the list.
5. Configure netinstall settings: In the Netinstall window, you will have several settings to configure. Provide the necessary information, such as the Netboot firmware, Boot Server IP, and Gateway IP. Ensure that the settings match your network environment.
6. Start the netinstall process: Once you have configured the settings, click on the "Install" button in the Netinstall tool. This will initiate the netinstall process and send the necessary files to the SXT SQ 5 device.
7. Wait for the installation to complete: The netinstall process may take a few minutes to complete. During this time, the SXT SQ 5 device will be restarted and the new firmware will be installed.
8. Verify the installation: After the netinstall process is finished, the SXT SQ 5 device will reboot with the new firmware. You can verify the successful installation by checking the device's status and configuration.
Note: It is important to ensure that you have a stable and reliable network connection during the netinstall process to avoid any interruptions or failures. Additionally, make sure to backup any important data from the SXT SQ 5 device before performing the netinstall, as it will erase the existing configuration.
#mikrotik
#mikrotik sxt lite 5
#netinstall mikrotik
Other Social Media links :
Http://www.dailymotion.com/mohdmzbdi
https://mohdmzbdi.blogspot.com
صيانة مايكروتك
1. Prepare your Netinstall tool: Download the latest version of the Netinstall tool from the official MikroTik website and install it on your computer. Ensure that your computer and the SXT SQ 5 device are connected to the same network.
2. Connect your SXT SQ 5 device: Connect your SXT SQ 5 to your computer using an Ethernet cable. Make sure the SXT SQ 5 device is powered on.
3. Open Netinstall: Launch the Netinstall tool on your computer.
4. Select the SXT SQ 5 device: In the Netinstall tool, you should see a list of available devices on your network. Select the SXT SQ 5 device from the list.
5. Configure netinstall settings: In the Netinstall window, you will have several settings to configure. Provide the necessary information, such as the Netboot firmware, Boot Server IP, and Gateway IP. Ensure that the settings match your network environment.
6. Start the netinstall process: Once you have configured the settings, click on the "Install" button in the Netinstall tool. This will initiate the netinstall process and send the necessary files to the SXT SQ 5 device.
7. Wait for the installation to complete: The netinstall process may take a few minutes to complete. During this time, the SXT SQ 5 device will be restarted and the new firmware will be installed.
8. Verify the installation: After the netinstall process is finished, the SXT SQ 5 device will reboot with the new firmware. You can verify the successful installation by checking the device's status and configuration.
Note: It is important to ensure that you have a stable and reliable network connection during the netinstall process to avoid any interruptions or failures. Additionally, make sure to backup any important data from the SXT SQ 5 device before performing the netinstall, as it will erase the existing configuration.
#mikrotik
#mikrotik sxt lite 5
#netinstall mikrotik
Other Social Media links :
Http://www.dailymotion.com/mohdmzbdi
https://mohdmzbdi.blogspot.com
صيانة مايكروتك
Category
🤖
Tech