This guy showed off incredible sculpting skills when he deiced to sculpt a human skeleton out of metal wires and clay. After working on the armature to create a base frame, they added a layer of green-colored clay to begin the sculpting. They then added more highlights and details to the sculpture using their advanced sculpting tools, colored the artwork, and finished their work.
“The underlying music rights are not available for license. For use of the video with the track(s) contained therein, please contact the music publisher(s) or relevant rightsholder(s).”
“The underlying music rights are not available for license. For use of the video with the track(s) contained therein, please contact the music publisher(s) or relevant rightsholder(s).”
Category
🗞
NewsTranscript
00:00Hi, my name is Alex, and in this episode of Magic Missile Minis, I'm going to be showing
00:05you guys how to sculpt a skeleton miniature for Dungeons and Dragons.
00:10Alrighty, so first things first, you're going to want to make your armature, and you're
00:14actually going to make the armature the same way you normally would for any other miniature.
00:20Cutting out your piece of wire, folding it in half, and then going ahead to twist out
00:24a torso and start making some legs.
00:27If you're interested for a little bit more depth in how I do these, you can check out
00:30the video in the card, which is my overview of how to sculpt miniatures.
00:34So once I have given him his arms, I can pose him up and I can put him on one of my little
00:41bottles that I have that I use as sculpting handles.
00:45Before I add any green stuff, I make sure that I file down the armature to make sure
00:49that the green stuff will actually stick onto it.
00:52And then I add on a layer of green stuff, making sure to keep it as thin as possible
00:56since we are going to be sculpting a skeleton after all, which don't tend to be particularly
01:01bulky.
01:02Since I want this guy to be holding a spear, I add a little bit more green stuff and add
01:06a wire onto his left hand.
01:09So with the armature finished, we can finally start actually doing some sculpting.
01:13And the first tip that I will give for anybody wanting to sculpt a skeleton or anything really
01:18is to look up reference.
01:19This will help instrumentally in making sure that you know what bones need to be where.
01:24With my reference up, I can start sculpting the basic shape for the chest as well as the
01:28pelvis.
01:29And one thing I would suggest if you're sculpting a skeleton is don't get too caught up in adding
01:34every single little detail.
01:36Like here you can see me sculpting in the pelvis.
01:38I'm doing a fairly rough shape and that's honestly going to serve for what it needs
01:43to be.
01:44So don't get too caught up in adding every last detail, especially for a miniature like
01:49this where you're probably going to want to have a handful of these skeletons that you're
01:53going to be using in an encounter or something along those lines.
01:57So once you have the basic shape for the chest and pelvis, you can start adding a little
02:02bit more green stuff onto the limbs.
02:04And what I'm focusing on as I'm sculpting the femur bone is making it kind of concave
02:09with the center being fairly thin in comparison to the ends, which actually kind of have this
02:14rounded off shape that connect to the pelvis as well as the lower leg.
02:19And once you're sculpting the bones that are in the shin, I don't actually know what those
02:22are called.
02:24You mainly want to try to get that detail of the fact that there are two bones there.
02:30Once I've got the legs finished, I then go back to the chest that we had made and start
02:35adding the ribs.
02:36These are actually not that difficult to do.
02:39They're simply indentations into the chest that we had just made.
02:43One thing that you might have to play around with is making sure that you don't move the
02:48entire chest around too much as you're adding these indentations because it can be pushed
02:52around as you're adding all of the ribs.
02:55It is also important to keep in mind that you're going to want to add a detail for the
03:00sternum and the ribs as well.
03:02But I shouldn't have to tell you that because you should be using reference and so you should
03:06see it.
03:07Have I told you guys to use reference enough yet?
03:10Once I finish the torso, I add some more green stuff onto the arms, mimicking the same process
03:15that I did for the legs.
03:17After that, we can move on to work on the skull.
03:20And a cool little trick that you can do to create a good sculpting handle for small details
03:24like this is you can actually take the blade out of your craft knife and then stick some
03:29wires in there and then start sculpting on that rather than trying to do it on a separate
03:35piece of wire or whatever.
03:38And I found that to be really, really helpful for this kind of stuff.
03:41But as you're sculpting this guy, your main focus is going to be sculpting in the eye
03:45eye sockets as well as the temples.
03:48But the rest of the details we're going to go back in and add after it's set.
03:52I then want to start working on the spear, so I quickly chop off the extra wire that
03:57I've added and cover that with a thin layer of green stuff as well, adding a little bit
04:03of texture to that, some lines in it to make it look more like wood.
04:07I then go back to the skeleton and add the spine, which I'm adding now that everything
04:12on the miniature has set.
04:13And so I add a long piece of green stuff running along the spine and start sculpting
04:17in all of the different and start adding all of the little details for that, keeping in
04:22mind that I want to have the sections corresponding to the ribs that I've made before and add
04:30little bits jutting out from the parts where there aren't any ribs down towards his lower
04:34back.
04:35I then also want to make this guy a shield, so I sculpt that onto a separate miniature
04:41base and add all of the details like the wooden texture of the planks and stuff like
04:46that.
04:47And while I'm doing that, I also make the spearhead that I'm going to add to the spear
04:52later on.
04:53Now that the green set has set on the skull, I go back there and start adding the final
04:58details, primarily adding the nose for the skull as well as the upper and lower jaw.
05:05And one thing to note that I actually decided not to do is I don't actually give him any
05:09teeth.
05:10That's something that I feel like you could add, but it's a fairly fine detail that honestly
05:15won't be missed, especially again, like I mentioned before, if you're trying to make
05:20like five of these guys, that's a very small detail that'll take a lot of time that you
05:24can just omit and it doesn't detract from the miniature in any way.
05:29Once those details have set, I take it off the craft knife that we were using as a sculpting
05:32handle and cut away at the wires that are now attached to the skull.
05:39And then I add a little bit of green stuff onto the model and I can attach the skull
05:44to the miniature itself.
05:46Also being sure to do a little bit of sculpting on the back of the neck to make that go into
05:51the rest of the spine a little bit more seamlessly.
05:56I also almost forgot to actually add the collarbone, so I quickly do that and technically you should
06:01probably do this before you add the skull, it'd be a lot easier, but I add the collarbone
06:06and then I go back and I also add the shoulder blades as the kind of final details of the
06:13main body of the skeleton.
06:16I then go back and cut out the shield that we had made and actually add a little bit
06:20more green stuff onto the other side to make a couple of the details and then while that
06:25still hasn't set yet, attach that onto the arm.
06:29And then I go back to our base and I take off the spearhead as well, attaching that
06:35onto the spear itself.
06:38And then to finish off the miniature, we can add the feet and the hands and this is actually
06:42a fairly difficult part and I would suggest using a combination of your flat sculpting
06:48tool to get the basic shape of each of the bones for the hand, but also using either
06:54a craft knife or a needle because to really sell the look, you do need to kind of make
06:59the same concave shape that we've added for some of the other bones, but obviously on
07:04a much smaller scale.
07:06I also add a little bit of cloth onto this spear to kind of mask where the arms kind
07:13of fused in with the spear shaft.
07:16Adding these wraps on different parts of the miniature can be a really great way to cover
07:20your mistakes or to add definition and separation between two details that might be mistaken
07:25for one another.
07:27With the spear and hands done, I now quickly go and add the feet of the miniature following
07:32a fairly similar process, but the feet themselves are a lot easier to do since they're generally
07:38in less complicated shapes than hands are.
07:41And with that detail added, our miniature is finished and here you can see a little
07:45turnaround of the finished miniature once I've added a base and here is the miniature
07:50with a layer of primer.
07:53And then I go ahead and give this guy a quick paint job.
07:56For this skeleton, it's not particularly complicated.
07:59I go over him with a base layer of a off-white, generally having to do two coats of thinned
08:06down paint to get full coverage since white is obviously a difficult color to get coverage
08:11on.
08:12And then go over the shield and the shaft of the spear with a brown.
08:16I also add a slightly brighter white onto the wrapping that we had put over the shield
08:22and then a little bit of metallic paint going over the spear head.
08:26Again, I'm keeping this fairly simple because the whole idea for these guys is you're probably
08:31going to want a handful of them and so you're not going to want to take a ton of time to
08:35paint each individual mini.
08:37With that in mind, I do some quick dry brushing over all of the wood and then go over that
08:42with some Agrax Earthshade, a dark brown wash for those of you who aren't familiar with
08:47it.
08:48And I go over almost all of the miniature with this Agrax Earthshade to get the dark
08:52shadows into all of the details and create a good bit of contrast.
08:56It also helps with the skeleton itself because it kind of makes that kind of dirty, grungy
09:01feel since it is like an undead creature.
09:03It's not like a pristine skeleton.
09:06However, as you can see me doing here, I actually add a black wash onto the metal parts.
09:12And then I go over the skeleton himself and add a quick dry brush to bring out some of
09:17those highlights and make it not quite so dark.
09:21And to finish the mini off, I do a little bit of dry brushing to bring back those highlights
09:25after the wash.
09:28I hope you guys found this video helpful.
09:30I noticed that a lot of you were requesting this project, which makes a lot of sense.
09:35Skeletons can seem very daunting to make, especially at this scale.
09:38Since skeletons are so skinny and there's all these tiny little bits to them, it can
09:41be difficult to kind of figure out how to approach this kind of a project.
09:45So I hope this gave you guys some helpful insight.
09:48But anyways, thank you guys so much for watching this video.
09:51If you enjoyed it, please leave a like, leave a comment if you have any questions, hit the
09:56bell, subscribe, all the good YouTube stuff.
09:59It really helps for a growing channel.
10:01But with all that out of the way, thank you guys so much for watching this video again,
10:05and I look forward to seeing you guys in the next one.