Teapot Fountain
- 6 years ago
Here is what you'll need!
Teapot Fountain
Supplies:
Plastic planter with no drainage holes
Drill
Circle saw drill bit
Small fountain pump
3 bricks
Decorative rocks
14 inch pipe
4 foot tubing
Small teapot
Teacup and saucer
Epoxy putty
Water
Instructions:
Drill a hole in the bottom of your plastic planter with a circle saw drill bit.
Pull the plug of your fountain pump through the hole.
Patch the hole with epoxy putty to make it waterproof.
Thread the tubing through your pipe to have about 6-8 inches of tubing on one side.
Attach the top of your tube to the teapot just under the spout with epoxy putty. Pull the tubing into the top of the teapot and attach the lid so it stays in. (you can also glue it to the inside)
Stand the teapot up on the tube, and place it between two bricks. Be careful not to pinch the tubing anywhere as you attach the other end of the tube to your fountain pump.
Place the teacup on the bricks under the teapot, and add decorative rocks to the planter.
Fill the planter with water, and plug in your pump.
The teapot will displace some of the water, so you may want to add more once it starts flowing out of the spout.
Enjoy your teapot fountain!
Check us out on Facebook! - facebook.com/buzzfeednifty
Credits: https://www.buzzfeed.com/bfmp/videos/...
MUSIC
Home For Tea_60Sec
Licensed via Warner Chappell Production Music Inc.
Teapot Fountain
Supplies:
Plastic planter with no drainage holes
Drill
Circle saw drill bit
Small fountain pump
3 bricks
Decorative rocks
14 inch pipe
4 foot tubing
Small teapot
Teacup and saucer
Epoxy putty
Water
Instructions:
Drill a hole in the bottom of your plastic planter with a circle saw drill bit.
Pull the plug of your fountain pump through the hole.
Patch the hole with epoxy putty to make it waterproof.
Thread the tubing through your pipe to have about 6-8 inches of tubing on one side.
Attach the top of your tube to the teapot just under the spout with epoxy putty. Pull the tubing into the top of the teapot and attach the lid so it stays in. (you can also glue it to the inside)
Stand the teapot up on the tube, and place it between two bricks. Be careful not to pinch the tubing anywhere as you attach the other end of the tube to your fountain pump.
Place the teacup on the bricks under the teapot, and add decorative rocks to the planter.
Fill the planter with water, and plug in your pump.
The teapot will displace some of the water, so you may want to add more once it starts flowing out of the spout.
Enjoy your teapot fountain!
Check us out on Facebook! - facebook.com/buzzfeednifty
Credits: https://www.buzzfeed.com/bfmp/videos/...
MUSIC
Home For Tea_60Sec
Licensed via Warner Chappell Production Music Inc.