How to build the Multiplex FunCub Part #1
Tutorial How to build the Multiplex FunCub Part #1 check Components & Assembling\r
Glues to use are : Zacki ELAPOR (I used Gorilla glue mix with water to speed up gluing time 10 to 30 minutes to hard. or Hot glue, but not too hot which will melt foam. a cool Hot Glue ?) \r
\r
1. Fuselage. Glue latch catches and the motor mounts\r
2. Server. Installing elevator and rudder servos \r
3. Control Snakes Prepare sleeves pushrods and install \r
4. Preparing Wing Speader Plates with flat nosed pliers\r
5. Joining Fuselage Shells.\r
\r
Motor setup wil be using Turnigy Aerodrive c3542 - 1250 ( 3542 1250kv )\r
Prop 10x6 Electric propeller + 2200mAh Turnigy 2.2 Nano Tech 35 70C\r
FrSky 2.4ghz Transmitter Receiver + 40 to 60 Amp Speed controller\r
\r
PC Gaming videos & Gameplay and How to Tutorials by Simkraf new\r
Minecraft website MC IP * mc.simkraf.com\r
* Friend on Facebook & Follow on Twitter ! :)\r
\r
Subscribe, Like, Favorite, Share, Comment ! I will reply * Simkraf =^.^=
Glues to use are : Zacki ELAPOR (I used Gorilla glue mix with water to speed up gluing time 10 to 30 minutes to hard. or Hot glue, but not too hot which will melt foam. a cool Hot Glue ?) \r
\r
1. Fuselage. Glue latch catches and the motor mounts\r
2. Server. Installing elevator and rudder servos \r
3. Control Snakes Prepare sleeves pushrods and install \r
4. Preparing Wing Speader Plates with flat nosed pliers\r
5. Joining Fuselage Shells.\r
\r
Motor setup wil be using Turnigy Aerodrive c3542 - 1250 ( 3542 1250kv )\r
Prop 10x6 Electric propeller + 2200mAh Turnigy 2.2 Nano Tech 35 70C\r
FrSky 2.4ghz Transmitter Receiver + 40 to 60 Amp Speed controller\r
\r
PC Gaming videos & Gameplay and How to Tutorials by Simkraf new\r
Minecraft website MC IP * mc.simkraf.com\r
* Friend on Facebook & Follow on Twitter ! :)\r
\r
Subscribe, Like, Favorite, Share, Comment ! I will reply * Simkraf =^.^=